skip to Main Content

Color Fastness to Washing SW-8A/12A

Rated 0 out of 5
(be the first to review)

Color Fastness to Washing is also Washing Fastness Tester or Launder Ometer which is used to determine Colour fastness to washing or dry cleaning of fabrics consisting of cotton, wool, silk, ramie, chemical fiber, etc. And to examine the dye washing color fastness capability for dyeing industries, textiles inspection departments and research departments, etc.

Color Fastness to Washing SW-8A/12A  

The sample is tested under suitable temperature, washing liquid, bleaching and friction. The color changes of samples can be obtained in a short time. This friction is produced by the impact of samples and containers, low bath ratio solutions and steel balls.

The main factors affecting the test results, in the fading effect method, Its importance is in turn. : temperature, color with white cloth, fluid volume, stainless steel ball, time and the order of the stainless steel ball interaction.

The influence of temperature was the most, and the factors that were in the color white cloth had little effect. The importance in influencing the stained white cloth is the interaction of color white cloth, temperature, sodium carbonate, liquid amount, time, and stainless steel ball.

Among them, the color white cloth has the greatest influence, the temperature influence is also very big, the time and the stainless steel ball these two factors have little influence. For this reason, different test temperatures should be selected for samples of different fibers.

Follows are Color Fastness to Washing specification :

  • Touch screen, easy to operate;
  • Low water level protection, the heating is not accessible if do not reach minimum water level;
  • Relative standards have been built in the program, select the corresponding standard to proceed the running directly;
  • Custom standards, define the standard by oneself, e.g. temperature, time;
  • Fitted with over temperature protection device to shut down the unit in case of overheating;
  • Stainless steel construction of water bath chamber, test chamber and container;
  • Alarm automatically when the test is over;
  • SW-8A/8AB/12A/12B/12AB: One working chamber, 8pcs/12pcs 550ml containers or 6pcs 1,200ml containers can be used simultaneously;
  • SW-12M: One working chamber and one pre-heating chamber, 12pcs 550ml containers or 6pcs 1,200ml containers can be used simultaneously. The other type of containers (1,200ml or 550ml) can be heated ahead, the testing time will be decreased;
  • SW-24A: Two working chambers, 24pcs 550ml containers or 12pcs 1,200ml containers can be used simultaneously.

Application

Application of Color Fastness to Washing  

SW Series Color Fastness to Washing Tester is used to determine the color fastness to washing or dry cleaning of fabrics consisting of cotton, wool, silk, ramie, chemical fiber, etc. and it is also used to examine the dye washing color fastness capability for dyeing industries, textiles inspection departments and research departments, etc.

The sample of the textile is adhered to the specified lining fabric. Then put into the standard solution, By mechanical stirring within the prescribed time and temperature conditions and rinse thoroughly and dry, We will get the color change and Color Staining compare with AATCC or ISO gray scale

The machine accords with ISO105-C01~C06, ISO105-D01, BS1006 ,IWS TM177, 193

If you need more information about Weathering Test Equipment, please contact with us.

Standards

Color Fastness to Washing Standard

ISO105-C01~C05,C10 ISO105-D01 BS1006 JIS L0844 (Method A, B) GB/T 3921, 5711 AATCC TM61, TM132 M&S C4A

 

Some standards might not be the full version; to read the full version for free, write an email to [email protected].
Please contact the administrator to get any violations removed.

Key Specification

Key specification of Color Fastness to Washing

Model 550ml container 1,200ml container Dimension(W*D*H)
SW-8A 8pcs / 890*490*1,100mm
SW-8AB 8pcs 6pcs 890*490*1,100mm
SW-12A 8pcs / 890*490*1,100mm
SW-12B / 6pcs 890*490*1,100mm
SW-12AB 12pcs 6pcs 890*490*1,100mm
SW-12M 12pcs 6pcs 1,120*740*1,130mm
SW-24A 24pcs 12pcs 1,120*740*1,130mm
Rotating speed (40±2)rpm
Timing range 1~999min, settable
Temperature range RT ~ 99.9℃,settable
Temperature accuracy ±1oC
Power of heater 4.5KW
Power of motor 180W
Power supply AC380V, 50Hz, 3-phase

Related Post

Related Post

Everything You Need to Know About Color Fastness to Washing

The color fastness of textiles to washing refers to the fabric’s capacity to retain its original color under washing circumstances. The blog contains the standard and determination for color fastness to washing, and some tips to improve it.

Reviews

There are no reviews yet.

Be the first to review “Color Fastness to Washing SW-8A/12A”

You may also like…

Back To Top