skip to Main Content

Lab Coater MU572C

Rated 0 out of 5
(be the first to review)

Lab Coater, also named laboratory coating table  , or  laboratory coating equipment which is suitable for laboratorial proofing test including all sorts of natural fiber, synthetic fiber, blended fabric, nonwoven fabric, specialty paper and artificial leather.Lab Coater is a coating machine for lab use, operated by hand with the coating area of 285mm×300 mm, which is used in lab coating technique experiment.

Lab Coater MU572C

MU572C Lab Coating Table is coating equipment for lab use, operated by hand with the coating area of 285mm×300mm, which is used in lab coating technique experiment. It is suitable for laboratorial sampling test including all sorts of natural fiber, synthetic fiber, blended fabric, nonwoven fabric, specialty paper and artificial leather.

Follows are lab coater specifications:

1.Better Cost-effective and Quality Design

  •  High grade stainless steel construction, foundation made of cast iro
  • Import linear sliding track from Germany.
  • Equipped ingenious fixture along with blade to block pigment to flow ou
  • Gradient of blade can be adjustable from 20° up to 115°.

2.More choice

  • Four kinds of blades: triangle blade, olecranon blade, square blade and round blade.
  • Two roller types: dynamic roller and static rolle
  • Three tension frame types: pin frame (for fabric), trim strip frame (for paper) and roller frame (universal), which can achieve “Auxiliary fixed from the transverse, automatic alignment from the longitudinal”.
  • Two coating methods: put static roller into the middle groove or put the both rollers into the first and third groove to meet different needs.
  • Two tension modes: thread tension (small adjustable range) and sliding sleeve tension (wide adjustable range).

3. More Humanization Design

  • Separate frame handle and screw handle prevent from scalding.
  • Easier to install coating blade and easier to adjust front angle than other company’s products.
  • Tension frame with aluminum alloy manufacture to be more light and heat resisting.

4.Optional Supporting Equipment

  • Compatible with Mathis LTE-S Lab Coater.
  • Compatible with our MU547 Mini Dryer.
  • MU547 Mini Dryer is used for setting and drying of coated fabric samples.
    • Temperature range: RT~150℃, can be customized
    • Heating power: 2,000W in two pieces
    • Power supply: AC220V, 50Hz
    • Dimensions: 800×1,000×1,250mm
    • Net weight: 130kg
    • Three designs: manual, automatic and custom-made steam functions

Application

Application of Lab Coater

lab coater is a manual coating device for laboratory use with the coating. It is widely use for quality control and formulation development in laboratories.

The coating layer thickness can be easily adjusted from 0 to 5 mm (+/- 0.01mm). This device can also be used to make lamination with optional laminating roller. It can be used together with our LD3642 Min-Dyer Machine .

If you need more Laboratory Coating machine .please contact with us .

Key specification

Key specification of Laboratory Coating Machine

Tension Frame 365mm×440mm
Coating Area 285mm×300 mm
Coating Thickness 0~5mm
Accuracy of Coating Thickness 0.01mm
Coating Front Angle 20°~115°
Blade Type 45°blade
Blade Spec 300mm×60mm
Roller Φ40mm×300mm
Dimension 600×600×300mm (L×W×H)
Weight 30kg
Optional drying equipment MU547 Mini Dryer

Reviews

There are no reviews yet.

Be the first to review “Lab Coater MU572C”

Your email address will not be published.

You may also like…

Back To Top