Electrothermal Blast Chamber XCB-1
The XCB-1 Electrothermal Blast Chamber is primarily used in conjunction with a hydrostatic pressure tester to assess the thermal stability of plastic pipes. Hydrostatic pressure testing is performed at 110°C, provided that air is present outside the test piece and water is present within. During the 8760-hour test period, under the given hydrostatic stress conditions, ascertain if the test item is destroyed.
Electrothermal Blast Chamber XCB-1
XCB-1 Electrothermal Blast Chamber is mainly used with hydrostatic pressure tester, to determine the thermal stability of plastics pipes by hydrostatic pressure testing carried out at 110℃ under the condition that the medium inside the test piece is water and outside the test piece is air. Determine whether the test piece is damaged during 8760 hours test period under specified hydrostatic stress condition.
This machine complies with ISO 1167, 15874-2, GB/T 6111, 18742.2 etc international and retailer standards.
Follows are features Electrothermal Blast Chamber;
- With double insulated glass door and built-in observation lamp, it is convenient for users to observe the test and avoid accidental scald;
- The 90mm thickness insulation layer reduces the cost of the test and improves thereliability of the instrument;
- The heater has self-protection function to avoid accidental damage of it;
- The machine has stainless steel frame and liner, not only beautiful but also enhanced corrosion resistance.
Application
Application of Electrothermal Blast Chamber
The XCB-1 Electrothermal Blast Chamber is primarily used in conjunction with a hydrostatic pressure tester to assess the thermal stability of plastic pipes. Hydrostatic pressure testing is performed at 110°C, provided that air is present outside the test piece and water is present within. During the 8760-hour test period, under the given hydrostatic stress conditions, ascertain if the test item is destroyed.
If you need more information about XCB-1 Electrothermal Blast Chamber. Please contact with us.
Standards
Standards of Electrothermal Blast Chamber
| ISO 1167, 15874-2 | GB/T 6111, 18742.2 |
|---|
Some standards might not be the full version; to read the full version for free, write an email to [email protected].
Please contact the administrator to get any violations removed.
Key specification
Key specification of Electrothermal Blast Chamberr
| Temperature range of chamber | RT~120℃ |
|---|---|
| Temperature accuracy | ±1℃ |
| Temperature uniformity | ±1℃ |
| Max. suitable pipe diameter | Φ63mm |
| Max. length of test piece | 500mm |
| Number of working positions | 8 |
| Power supply | AC220V, 50Hz |
| Dimensions(L×W×H) | 1,120×980×1,200mm |
You must be logged in to post a review.
Reviews
There are no reviews yet.