skip to Main Content

Burst Test Machine is also named bursting strength tester.

Burst Test Machine is mainly used for the determination of all kinds of cardboard and monolayer and multilayer corrugated board, It can also be used for fabric material burst strength test.

There have Digital Bursting Strength Tester, Board Bursting Strength Tester, Pneumatic Bursting Strength Tester, Zipper Slider Bursting Strength Tester etc….

Method: The sample of a certain area is overlaid on the elastic diaphragm, and it is increased gently under the diaphragm with a specified size ring clamp. And then load pressure until the sample is broken.

A uniform distribution of liquid or gas on the surface of a film, sheet, or fabric is continuously pressurized, Specimen reaches the yield is maximum pressure

FYI is bursting strength tester manufacturers and also supply burst test method and standard .if you want to know more .please contact with us directly.

Burst Test Machine Standard:

QB/T 2171, QB/T 2172, QB/T 2173-2001, ISO 2758, ISO 2759, ISO 13938.2,

ASTM D3786, GB/T 7742.2, GB/T 7742.1,ISO 13938-1,ASTM D3786

Abrasion testing machine is capable of simulating rolling, sliding or sliding and rolling in a certain contact pressure. It can be used to evaluate the friction and wear properties of lubricant, metal, coating, rubber, ceramics and other materials.

FYI are best abrasion resistance testing machine supplier and exporter in China . Our Abrasion Tester including din abrasion Tester, NBS abrasion Machine, AKRON Abrasion Tester, Sole Abrasion Resistance Tester , Martindale Abrasion and Pilling Tester, Taber Abrasion Tester, .Sole Friction Coefficient Tester, Footwear Slip Resistance Tester, Pedestrian Abrasion Test Machine, Shoe Laces Abrasion Tester, .Shoe Lace & Eyelet Abrasion Tester etc…

What is Dyeing Abrasion Testing Equipment ?

Abrasion tester is used to determines the resistance by the frictional loss of the rubber, footwear ,Fabric, Textile,Pencil et in products,

There have Five basic types of friction and abrasion machine:  Adhesive wear Machine, Abrasive Abrasion, fatigue Abrasion , Corrosion wear and fretting wear.

Adhesion wear Machine: friction pair relative motion, due to solid phase welding, contact surface material from one surface to another surface.

Abrasive Abrasion Tester: in the process of friction, the material falling off due to hard particles or hard protrusions, which is caused by the erosion of the friction surface.

Fatigue Abrasion Instrument : two rolling contact surface for rolling or sliding in friction, and periodic load effect, make the surface deformation and stress, so that the materials lead to crack and separate the micro pieces or wear is fatigue wear particles

Corrosion Abrasion Equipment: during friction, the metal reacts with the surrounding medium to produce material loss.

Fretting wear Testers: compound wear.

Showing 1–16 of 67 results

Burst Test Machine is also named bursting strength tester.

Burst Test Machine is mainly used for the determination of all kinds of cardboard and monolayer and multilayer corrugated board, It can also be used for fabric material burst strength test.

There have Digital Bursting Strength Tester, Board Bursting Strength Tester, Pneumatic Bursting Strength Tester, Zipper Slider Bursting Strength Tester etc….

Method: The sample of a certain area is overlaid on the elastic diaphragm, and it is increased gently under the diaphragm with a specified size ring clamp. And then load pressure until the sample is broken.

A uniform distribution of liquid or gas on the surface of a film, sheet, or fabric is continuously pressurized, Specimen reaches the yield is maximum pressure

FYI is bursting strength tester manufacturers and also supply burst test method and standard .if you want to know more .please contact with us directly.

Burst Test Machine Standard:

QB/T 2171, QB/T 2172, QB/T 2173-2001, ISO 2758, ISO 2759, ISO 13938.2,

ASTM D3786, GB/T 7742.2, GB/T 7742.1,ISO 13938-1,ASTM D3786

Abrasion testing machine is capable of simulating rolling, sliding or sliding and rolling in a certain contact pressure. It can be used to evaluate the friction and wear properties of lubricant, metal, coating, rubber, ceramics and other materials.

FYI are best abrasion resistance testing machine supplier and exporter in China . Our Abrasion Tester including din abrasion Tester, NBS abrasion Machine, AKRON Abrasion Tester, Sole Abrasion Resistance Tester , Martindale Abrasion and Pilling Tester, Taber Abrasion Tester, .Sole Friction Coefficient Tester, Footwear Slip Resistance Tester, Pedestrian Abrasion Test Machine, Shoe Laces Abrasion Tester, .Shoe Lace & Eyelet Abrasion Tester etc…

What is Dyeing Abrasion Testing Equipment ?

Abrasion tester is used to determines the resistance by the frictional loss of the rubber, footwear ,Fabric, Textile,Pencil et in products,

There have Five basic types of friction and abrasion machine:  Adhesive wear Machine, Abrasive Abrasion, fatigue Abrasion , Corrosion wear and fretting wear.

Adhesion wear Machine: friction pair relative motion, due to solid phase welding, contact surface material from one surface to another surface.

Abrasive Abrasion Tester: in the process of friction, the material falling off due to hard particles or hard protrusions, which is caused by the erosion of the friction surface.

Fatigue Abrasion Instrument : two rolling contact surface for rolling or sliding in friction, and periodic load effect, make the surface deformation and stress, so that the materials lead to crack and separate the micro pieces or wear is fatigue wear particles

Corrosion Abrasion Equipment: during friction, the metal reacts with the surrounding medium to produce material loss.

Fretting wear Testers: compound wear.

Back To Top