Fiber Tensile Tester YG005X
A dry or wet fiber is tested for tensile strength using the YG005X Fiber Tensile Tester, which also displays the measured individual value, mean value, variation coefficient of fiber breaking force, breaking elongation, and force at a preset elongation.
Fiber Tensile Tester YG005X
YG005X Fiber Tensile Tester is used to perform the tensile test of a dry/wet fiber, and to display the measured individual value, mean value, variation coefficient of fiber breaking force, breaking elongation, and force at specified elongation. The operation of the tester is controlled by the computer, and during a tensile test the real time force-elongation curve is displayed on the computer screen. The measured data are analyzed and saved in the computer.
When connecting ZK100F Vibration Fiber Fineness Tester with YG005X , the linear density, fiber strength, modulus and specific work can be determined. This system complies with international chemical fiber testing standards, also has stable performance and high test accuracy.
For more information, you can also visit www.fyichina.com.cn .
Application
Application of Fiber Tensile Tester
YG005X Fiber Tensile Tester is used to perform the tensile test of a dry/wet fiber, and to display the measured individual value, mean value, variation coefficient of fiber breaking force, breaking elongation, and force at specified elongation.
YG005X and ZK100F can be connected together. The linear density, fiber strength, modulus, and specific work may be calculated by connecting the ZK100F Vibration Fiber Fineness Tester and the YG005X Fiber Tensile Tester. This system provides excellent test accuracy, reliable performance, and compliance with worldwide chemical fiber testing requirements.
If you need more information about the machine. Please contact with us.
Standards
Standards of Fiber Tensile Tester
| ISO 5079 | ASTM D3822 | GB/T 14337 |
|---|
Some standards might not be the full version; to read the full version for free, write an email to [email protected].
Please contact the administrator to get any violations removed.
Key specification
Key Specification of Fiber Tensile Tester
| Force measurement range | 0~100cN |
|---|---|
| Force error | ≤±1% |
| Force resolution | 0.01cN |
| Elongation measurement range | 100 mm |
| Elongation error | ≤0.05mm |
| Elongation resolution | 0.1% |
| Test speed | 1~100mm/min |
| Stroke of lower clamp | 100mm |
| Air pressure | 0.4MPa |
| Power supply | AC 220V, 50Hz |
| Weight of main machine | Approx. 45kg |
| Dimensions of main machine | 540×434×560mm |
You must be logged in to post a review.
Reviews
There are no reviews yet.