Automatic Fiber Tensile and Fineness Test System YG005XD
YG005XD Automatic Fiber Tensile and Fineness Test System is used to measure the linear density, strength, modulus and specific work of fibers. The system conforms to international chemical fiber testing standards, with stable performance and high testing accuracy.
Automatic Fiber Tensile and Fineness Test System YG005XD
YG005XD Automatic Fiber Tensile and Fineness Test System is an upgraded product of YG005X Fiber Tensile Tester and ZK100F Fiber Linear Density Tester. The test devices of the two instruments are integrated into one. As long as the operator clamps the tested fiber sample into the holder of the vibrating fineness test device, press the start button, the instrument tests the fiber linear density, and then the sample is sent to the tensile test device through the mechanical arm, and the continuous test of the fiber linear density and tensile properties is automatically completed. The test operation is more automatic and convenient.
Application
Application of Automatic Fiber Tensile and Fineness Test System
YG005XD Automatic Fiber Tensile and Fineness Test System measures fiber linear density, strength, modulus, and specific work. With consistent performance and excellent testing accuracy, the system meets worldwide chemical fiber testing criteria.
If you need more information about the machine. Please contact with us.
Standards
Standards of Automatic Fiber Tensile and Fineness Test System
| STANDARDS | ISO 5079 | ASTM D3822 | GB/T 14337 |
Some standards might not be the full version; to read the full version for free, write an email to [email protected].
Please contact the administrator to get any violations removed.
Key specification
Key Specification of Automatic Fiber Tensile and Fineness Test System
1.Tensile Test
| Force measurement range | 0~100cN |
|---|---|
| Force error | ≤±1% |
| Force resolution | 0.01cN |
| Elongation measurement range | 100 mm |
| Elongation error | ≤0.05mm |
| Elongation resolution | 0.1% |
| Test speed | 1~100mm/min |
| Stroke of lower clamp | 100mm |
2.Linear Density Test
| Linear density measurement range | 0.8~40dtex |
|---|---|
| Linear density error | ≤±2% |
| Clamping length | 20mm |
| Length error between the upper and lower edges | ≤±1% |
| Tension clamp precision | ≤±0.5% |
| Resonance frequency measurement error | ≤±0.5% |
You must be logged in to post a review.
Reviews
There are no reviews yet.