Drop Tester DW9903
The purpose of the DW9903 Drop Tester is to replicate the harm that would be done to bags, cartons, and other packing materials if they were dropped or struck by hard objects while being transported.
Drop Tester DW9903
DW9903 Drop Tester is used to simulate the damage of bags, cartons and other packaging materials when they are dropped or hit by hard objects during transportation.
The tester conforms to QB/T 2921 standard.
Application
Application of Drop Tester
The purpose of the DW9903 Drop Tester is to replicate the harm that would be done to bags, cartons, and other packing materials if they were dropped or struck by hard objects while being transported.
Standards
Standards of Drop Tester
The tester conforms to QB/T 2921 standard.
Some standards might not be the full version; to read the full version for free, write an email to [email protected].
Please contact the administrator to get any violations removed.
Key specification
Key Specification of Drop Tester
| Support frame height | Not less than 1800mm |
|---|---|
| Release table | There is a hollow circle with a diameter of 300 mm on the release table, and a triangular depression groove at 45 degrees to the horizontal plane is parallel to the axis of the release table and passes through the center of the hollow circle. |
| Drop height | 600~1500mm, electrically adjustable |
| Drop control mode | Electromagnetic clutch mode |
| Test mode | Drop tests of specimen surfaces, edges and corners |
| Test specimen size | ≤900mm |
| Impact platform | Steel plate with a thickness not less than 15mm |
| Maximum load | 100kg |
| Power supply | AC 220V, 50Hz |
You must be logged in to post a review.
Reviews
There are no reviews yet.