skip to Main Content

Sole Adhesion Tester DW9670

Rated 0 out of 5
(be the first to review)

Sole adhesion tester,also named shoes sole adhesion tester,or sole adhesion strength tester,which was designed to measure the strength of the adhesion of stuck-on soles at the toe and heel in the shoe factory, but is equally useful in the laboratory.

Sole Adhesion Tester

This sole adhesion tester was designed to measure the strength of the adhesion of stuck-on soles at the toe and heel in the shoe factory, but is equally useful in the laboratory. A steel plate is used as a cantilever to pull the sole of the footwear away from the upper. The maximum force reading of the dial indicator is 100kg.

Follows are features of the tester:

  • A precise and very reliable tester to test the strength of adhesion of a sole to its upper.
  • Capable of determining the strength by accurate measuring.
  • Capable to apply force up to 100 kg

For more information about shoes testing, you can also visit www.fyichina.com.cn

Application

Sole Adhesion Tester

This sole adhesion tester was designed to measure the strength of the adhesion of stuck-on soles at the toe and heel in the shoe factory, but is equally useful in the laboratory. A steel plate is used as a cantilever to pull the sole of the footwear away from the upper. The maximum force reading of the dial indicator is 100kg.

If you need more information about sole adhesion tester, please contact us.

Standards

Sole Adhesion Tester

STANDARDS AS/NZS 2210.2 BS 5131 SATRA

 

Some standards might not be the full version; to read the full version for free, write an email to [email protected].
Please contact the administrator to get any violations removed.

Key specification

Sole Adhesion Tester

  • Scale range:         100kg
  • Dimensions:         310mm×160mm×160mm
  • Weight:                  18kg

Reviews

There are no reviews yet.

Be the first to review “Sole Adhesion Tester DW9670”

You may also like…

Back To Top