skip to Main Content

In-plane Water Flow Rate Test Apparatus DW1380

5.0 (2 reviews)

In-plane Water Flow Rate Test Apparatus,also named ASTM D4716 Geosynthetic In-plane Water Flow Rate Tester or Geosynthetic In-plane Water Flow Rate Tester which is used to determine the horizontal permeability of geosynthetic materials under constant water flow conditions .It is  Easy to use this machine .

In-plane Water Flow Rate Test Apparatus DW1380

In-plane Water Flow Rate Test Apparatus is applied to determine the in-plane flow rate per unit width and hydraulic transmissivity within the manufactured plane of geosynthetics under varying normal compressive stresses and standard hydraulic gradient using a constant head. Aggregate thickness of the test specimen and rubber sheets loaded on base: 20~100 mm , For better experimental operation, it is recommended to place the instrument on a cement workbench at a certain height depended on heights and operation habit of operators (the recommended height of workbench is about 450mm).

We provide reasonable price and high quality In-plane Water Flow Rate Tester. All of testing instruments manufactured by FYI are well-known throughout China . Of course we can discuss with customer and help customer to customized the machine .

Follows are features of the test apparatus

  • Conform to different standards, such as GB/T 17633, ASTM D4716 and BS EN ISO 12958;
  • Adjustable pneumatic pressure of 0~600Kpa;
  • Elevating screw rod to manually and continuously adjust head difference up to 400mm with water-level scale display.

For more information,you can also visit www.fyichina.com.cn

Application

Application of In-plane Water Flow Rate Test Apparatus 

In-plane Water Flow Rate Test Apparatus is applied to determine the in-plane flow rate per unit width and hydraulic transmissivity within the manufactured plane of geosynthetics under varying normal compressive stresses and standard hydraulic gradient using a constant head.

Supporting frame composed of aluminum alloy profiles with square cross-section is used to support the main body, reservoirs, overflow elevating device and water storage tank.

In-plane Water Flow Rate Test Equipment complies with BS EN ISO 12958-2010, ASTM D4716-2007 , GB/T 17633-1998, SL/T 235-9-2012 etc international and retailer standards.

If you need more information about Water Flow Rate Geotextile Machine. Please contact with us

Standard

Standard of In-plane Water Flow Rate Test Apparatus

ISO 12958 ASTM D4716 GB/T 17633 SL/T 235

 

Some standards might not be the full version; to read the full version for free, write an email to [email protected].
Please contact the administrator to get any violations removed.

Key specification

Key specification of In-plane Water Flow Rate Test Apparatus 

Platen size 305×305mm (L×W)
Test specimen thickness ≤50mm
Thickness of rubber sheet 10, 15, 20, 25mm
Normal pressure 0~600Kpa, adjustable
Normal pressure accuracy ±2%
Normal pressure resolution 5Kpa
Range of head loss 0~400mm, continuously adjustable
Accuracy of head loss ±1mm
Inflow reservoir specification 805mm in height with the scale of 0~400mm
370mm in width
Outflow reservoir specification 165×370mm (H×W)
Volume of water storage tank 120 L
Height of dam 100mm
Dimensions 2100×2050×650mm (L×W×H)

2 reviews for In-plane Water Flow Rate Test Apparatus DW1380

  1. Vaughan Ettienne

    I finally found this In-Plane Water Flow Rate Test.

  2. Crystal Schell

    The machine is stable, the service is meticulous and comfortable,and the machine is well packaged.

Add a review

You may also like…

Back To Top