skip to Main Content

Safety Footwear Compression/Sole Penetration Resistance Testing Machine DW9551

Rated 0 out of 5
(be the first to review)

Safety Footwear Compression/Sole Penetration Resistance Testing Machine, also called Safety Footwear Compression Tester, is widely used for checking the subsidence degree of the steel toe to see if toes are safe when wearing the safety shoe.

Category:

Safety Footwear Compression/Sole Penetration Resistance Testing Machine DW9551

Safety Footwear Compression/Sole Penetration Resistance Testing Machine is widely used for measuring the resistance of safety footwear to compression. The safety shoe steel toe is placed between the upper and lower platens of the machine, and the prescribed pressure is applied. The subsidence degree of the steel toe is checked to see if the safety of toes can be ensured when wearing. In addition, the sole’s ability to resist the nail penetration can be measured by using the optional clamping device for sole penetration test.

Follows are features of safety footwear compression/sole penetration resistance testing machine:

  • Conforms to GB/T, ISO, EN and ANSIA standards;
  • With micro printer;
  • Intuitive and convenient to operate.

Application

Application of Safety Footwear Compression/Sole Penetration Resistance Testing Machine

Safety footwear compression/sole penetration resistance testing machine is used to determine the safety footwear ability to resist the compression and the sole’s ability to resist the nail penetration.

Safety footwear compression/sole penetration resistance testing machine complies with GB/T 20991, ISO 20344.

If you need more information about safety footwear compression/sole penetration resistance testing machine, please contact us.

Standards

Safety Footwear Compression/Sole Penetration Resistance Testing Machine standards

GB/T 20991 ISO 20344

Key specification

Key specification of Safety Footwear Compression/Sole Penetration Resistance Testing Machine

Capacity of load cell 20kN
Load precision 1/20000
Accuracy ±1%
Compression force required for safety footwear (15±0.1)kN
Compression force required for protective footwear (10±0.1)kN
Speed 0~200mm/min (stepless adjustable)
Speed required for compression test (5±2)mm/min
Speed required for nail penetration test (10±3)mm/min
Motor type AC variable-frequency motor
Platen hardness 60HRC
Power supply AC220V 50Hz
Dimension 820×580×710mm(L×W×H)
Weight 148kg

Reviews

There are no reviews yet.

Be the first to review “Safety Footwear Compression/Sole Penetration Resistance Testing Machine DW9551”
Back To Top