skip to Main Content

Shoe Flexing Resistance Tester DW9610GB Series

Rated 0 out of 5
(be the first to review)

Shoe Flexing Resistance Tester, also named Floor Standing Shoe Flexing Tester, is used to test the flexing resistance property of sole, rubber, PBR, polyurethane and other reference materials according to the test method of GB/T 3903.1.

Shoe Flexing Resistance Tester DW9610GB Series

We provide reasonable price and high quality shoe flexing resistance tester. All the testing instruments manufactured by FYI factory are well-known throughout China and more than 50 countries abroad for providing superior value and performance.

Shoe flexing resistance tester is suitable for testing the flexing resistance of finished footwear and sole (sheet) under the normal temperature. Use a cutter to make a specified length of cut on the sole, which is installed on the instrument in such a way the cut is on the flexing line. After carrying out flexing test at a specified angle and speed, measure the length of cut growth and observe the change of upper, sole and upper-sole binding parts (includes strip and foxing).

Follows are features of shoe flexing resistance tester:

  • High performance, low noise, compared with similar devices worldwide;
  • Wide range of flexing speed, fully simulate shoe bending during human walking. Speed adjust switch can be locked manually in case the speed is changed accidentally;
  • Flexing angle is indicated by the angle scale equipped on each working position;
  • Special design for clamps. Shoes of different sizes can be clamped conveniently;
  • Individual and wide air outlet for each working position can blow the specimen evenly;
  • The tester can flex the specimens to the preset number of cycles and stop automatically. During flexing, the preset number and present number of cycles as well as flexing speed are displayed on LCD screen indicating when the test will be completed (excl. DW9610GB-II);
  • Safety protection cover can be equipped to increase the security. The tester cannot be started when the cover is open. Also it can stop automatically if you open the cover when it’s working (excl. DW9610GB-II).


Application of shoe flexing resistance tester

Shoe flexing resistance tester is used to test the flexing resistance property of sole, rubber, PBR, polyurethane and other reference materials.

Shoe flexing resistance tester complies with GB/T 3903.1.

If you need more information about shoe flexing resistance tester, please contact us.


shoe flexing resistance tester Standards 

GB/T 3903.1


Some standards might not be the full version; to read the full version for free, write an email to [email protected].
Please contact the administrator to get any violations removed.

Key specification

Key specification of shoe flexing resistance tester

Model No. DW9610GB-II DW9610GB-IV
Number of working positions 2 4
Flexing angle 50°±1°, adjustable
Flexing speed 230±10cpm (50~300±10cpm, adjustable)
Counter range 1~999,999 cycles, LCD display
Power supply AC 220V 50Hz
Package dimensions (L×W×H) 530×690×1400mm 1510×830×1370mm
Net/Gross weight 260/300kg 480/530kg


There are no reviews yet.

Be the first to review “Shoe Flexing Resistance Tester DW9610GB Series”

You may also like…

Back To Top