Textile Testing Machine Tender from Bangladesh Handloom Board (BHB)

Tenderer

The Bangladesh Handlooms Board is a state-owned and operated statutory public sector organization located in Dhaka, Bangladesh. It was established in January 1978 by the Government of Bangladesh and is administered by the Ministry of Textiles and Jute. The Board oversees the work of 1.5 million handloom weavers in Bangladesh. The Board works to preserve the traditional Benaras Palli, Jamdani and muslin weaving techniques of Bangladesh.

Recently our company participated in a tender organized by them related to textile testing instruments.

Technical specification of the textile testing machine

Fineness meter

Is a special Instrument which measure the fiber fineness of raw cotton or wool. Using the instrument, the quick and accurate of the quality of raw materials is possible. More effective mixing of cotton or wool is achieved.

Feature: Should take less than 10sec for each measurement

Specification :

Measuring Range : cotton 2.5-8.5 microgram/inch

Sample weight : cotton 5.0 g.     

Pilling Tester & Pilling Assessment Viewer with photograph: (Martindale Abrasion Tester) 

A versatile pilling testing and snagging testing system can be used to test both woven and knitted materials. Used to determine the pilling and abrasion test of the textile materials

Specification:

Minimum 4 chambers

Sample holders and other relevant equipment must be included with the machines to run the test perfectly.

Include required template

Photograph for assess visually    

Fabrics Stiffness Tester

Fabric Drape Tester 

To measure and calculate the coefficient of drape by tracing a shadow of the draped fabric on paper.

Cusick Drape Tester : 230V 50/60Hz

Standard Accessories:

1 x Box (500 pcs) Paper Rings 30 cm diameter

1 x Box (500 pcs) Paper Rings 36 cm diameter

1 x Box (500 pcs) Paper Rings 24 cm diameter, 1 x Spare Bulb

International Standard/Certificate:

UKAS Certificate of Calibration for the machine   

Spray Rating Tester

To determine the resistance of any fabric, which may or may not have been given a water-resistant or water-repellent finish, to surface wetting by water.

Feature:

Incorporates machined Spray Nozzle – designed to produce accurate water flow and consistent spray pattern

Standard accessories:

1 x Spray Nozzle, 1 x Specimen Holder, AATCC Spray Test Rating Chart

Fabric crease recovery tester

Features:

Stainless steel construction, Laser engraved rotary scale

Alignment Gauge for error-free measuring, Loading Device, with provision for applying different weights, to fulfil the requirements of European and American standards

Standard accessories:

Loading Device (10N and 19.63N weights) Specimen Tweezers (Metal) , Specimen Tweezers (Plastic),

Specimen Template 40 x 15 mm,

Specimen Template 50 x 25 mm Pack (25 sheets 100 x 150 mm) Paper Tissue

International Standard/Certificate:

M & S approved

Complies with AATCC 66, EN22313, ISO 2313, M&S P22. 

Rubbing tester   

Features: built-in, digital counter (battery-operated), Re-settable digital counters Guaranteed accuracy of loading and stroke length

Standard accessories:

1 x Packs (500 pcs) Crocking Cloths

International Standard/Certificate:

Compliant with EN ISO X12, AATCC 8, M&S C8 BS 1006 X12  

Tumble Dryer

To dry the sample after wash, Exhaust Temperature: Maximum 80˚C

Rotational Speed: 50rpm, Directional Change: Every 2 minutes.

Universal Strength Tester 

Tensile Tester with multi-purpose pneumatic grips for textile & Garments industry applications

Application supported: Fabric tensile, Yarn tensile, Seam Slippage, Tear/peel bond Attachments/Garments test, Cyclic test.

Must have Features: Pre-programmed library of international standards

100mm wide specimen capacity and zero zaw separation during testing

Dedicated textile software

Jaw separation distance must be determined by the software

Jaws must close in a two-stage process

Software must have Jaw auto-recognition facility

Must have pressure sensor

Specification must comply below:

Measuring Principle: Constant Rate of Extension (CRE)

Load: Capacity (Tension & Compression): 5000N, 5kN, 500kgf and 1100lbf

Load Cells: Three (3) load cells can be configured from a choice of five (5): 5000N, 1000N, 500N, 200N & 100N. Quick-change cartridge, auto-recognition ?S? beam cells.

Test / Return / Jog Speed: 1 – 2000mm/min

Accuracy of Load Cells Class: 0.5 (±0.5%) from 2 – 100% of load cell capacity.

Speed Accuracy: ±0.005%

Maximum Stroke: 560mm – Maximum usable extension with T27 jaws fitted.

Total Vertical Stroke: 700mm – Maximum movement of the head between limit switches when no jaws are fitted.

Positional Accuracy: ± 0.00125mm.

Calibration: Load Cells: ISO 7500-1 (UKAS accredited) & ASTM E4

Instrument: ISO 7500-1 & ASTM D76.

Safety: CE marked (complies with Machinery, Low Voltage & EMC Directives).

Pneumatics:

Input pressure: 8 bar, Testing pressure: 8 bar

Air preparation: Filtered to 5 microns (absolute) or better to remove excess particulates, oil and moisture.

Control System:

Type: CRE PC Control: Windows XP Software with all available ISO, ASTM methods built in.

Drive control: Digital precision closed loop A.C. servo system via RS232 serial port

Accessories:

1 x Load Cell : 5000N, 1000N, 100N

Pneumatic Universal Jaws: Tensile, Seam slippage and tear test.

Pneumatic Yarn Jaws: Testing Yarns, with aluminum jaw faces.

Needle Clamp -1& 2: Seam slippage test,

C-Clamps: Stretch and recovery test on looped specimens upto 125mm wide with 8mm and 10mm diameter bars.

2 KVA on line UPS 30 min. backup,

1 x Latest computer & Printer

1 x compressor

International Standard/Certificate:

Must Comply with below standard:

International Standard/Certificate:

Complies with M&S P115, M&S P122, M&S P124, BS 3084 Test1, BS 3084 Test2, BS 3084 Test3, BS 3084 Test4, NEXT© TM 25, ISO.

Origin: UK/EU   

Crimp Tester

Twist tester

Electronic Twist Tester to determine twist of single, twisted (S&Z) and Open End yarns. Three methods available: traditional method (untwisting, re twisting of single yarns), direct method (untwisting for plied yarns, threads and multi-filaments) and ?Schutz? method (untwisting, re twisting and double counter-check for OE).

Specification:

Adjustable clamps distance from 1 to 50 cm (1-20 inches).

Electronic counting and digital display of the twists.

Start and Stop test with ?0? optical signal control.

Twist reading accuracy: +/- 1 turn.

Device for the setting or the maximum elongation and the desired pretension.

Equipped with two serial ports, for the connection to the PC (software and cable included) and to the printer (optional).

Pretension system with pulleys with 9-wights kit, up to 70 cN.

Adjustable clamp speed, up to 2000 rpm.

Testing capacity: yarn counts from Nm 0,5 a to 200.

Accessories included: magnifying lens, fixed aliper, pretension weights, bobbin holder, software+cable.

GSM cutter with cutting board 

Sample Cutter: 100 cm² (113 mm diameter)

1 x Pack (10) Cutting Boards, 1 x Pack (100) Blades .  

Digital Wrap reel machine

Electronic wrap reel at 1 meter (or 1 yard or 1,5) with special tension device for 10/12 positions (traverse motion 25mm), equipped with pre-selector, display and standard creel (5-7 positions) Speed :50 to 300 r.p.m.

Turns indicator : LCD display.

Turns preselector : Electronic at 3 digit, shuttle of 100mm.

Diameter. 66x63x63cm.

Weight kg.36,00

Power supply 220v 50/60Hz 180W