Cone Drop Test Apparatus DW1240
Cone drop test apparatus, also named Geotextile Cone Drop Tester. FYI is one of the famous manufacturers and suppliers of cone drop tester in the world, devoting to offering cost effective testing solutions and equipments for various industrial applications.
Cone Drop Test Apparatus DW1240
The Cone Drop Test Apparatus manufactured by FYI based on a diverse range of testing requirements or standards. Engineers available to service machinery overseas. Of course, we also have agents and distributors to assist you timely in over 20 countries around the world.
Cone Drop Test Apparatus is used for determination of geotextile and its related products from the fixed height of falling steel cone penetration resistance ability, the geotextile clamping in the clamping ring sample level, make the regulation quality of steel cone fell from 500 mm height on the sample, the hole is formed on the sample, then to marked with scale of small Angle cone inserted into the hole in the measured the degree of penetration.
Follows are features of cone drop test geotextiles.
- Magnetic switch to release the cone;
- Safety screen of transparent glass;
- This cone drop test mainly in stainless steel construction;
Application
Application of Cone Drop Test Apparatus
Cone Drop Test Apparatus is used to determine the resistance of geosynthetics to penetration by a steel cone dropped from a fixed height. The degree of penetration is an indication of the behavior of geosynthetics when sharp stones are dropped on its surface.
Please put down the transparent shield before the steel cone falls.It is not damaged by the steel cone. It is not allowed to test hard objects.
For the sake of safety, please make sure that the steel cone is locked every time the steel cone is in the upper position.
In order to ensure the free fall of the steel cone, there is no debris in the guide hole.
Cone Drop Test complies with ISO13433, GB/T17630, JTG E50 T1128 , BS EN ISO918 etc international and retailer standards.
If you need more information about Cone Drop Test Geotextiles. Please contact with us
Standards
Standards of Cone Drop Test Apparatus
| GB/T17630 | ISO 13433 |
|---|---|
| JTG E50 T1128 | BS EN ISO918 |
Some standards might not be the full version; to read the full version for free, write an email to [email protected].
Please contact the administrator to get any violations removed.
Key specification
Key Specification of Cone Drop Test ApparatusTester
| Inner diameter of clamping rings | 150mm±0.5mm |
|---|---|
| Test height | 500 mm±2mm |
| Angle of stainless steel cone | 45° |
| Max. diameter of stainless steel cone | 500mm |
| Mass of stainless steel cone | 1000g±5g, |
| Mass of measuring cone | 600g±5g, |
| Range of measuring cone | 2~50mm |
| Dimensions | 560×480×1540mm (L×W×H) |
| Weight | 55kg |
You must be logged in to post a review.
Reviews
There are no reviews yet.