Universal Testing Machine DW1210
Universal Testing Machine also named UTM machine which is used to carry out the tensile strength test, trapezoid tear resistance test, puncture resistance test and punch through test on geosynthetics or geosynthetic-related products.
This universal test method covers the measurement of load-elongation characteristics, including procedures for the calculation of maximum load per unit width and strain at maximum load. Procedures for measuring the tensile properties of both conditioned and wet specimens are included.
Universal Testing Machine DW1210
Universal Testing Machine is widely to test the tensile properties of materials. In the field of textile, metal and other materials, At first need to determine the field of application. And then confirm what the criteria should be conform to . and then recommend correct instruments and correct clamps . for example ASTM D4883 . Ring clamp attachment with an open internal diameter of 45±0.0025mm while external diameter is suggested to be 100±0.0025mm; Solid steel rod with a diameter of 8±0.01mm having a flat end with a 45°=0.8mm chamfered edge contacting the test specimen’s surface
No special requirement on the computer hardware configuration can run on windows operation system, it must install Office2000.
FYI are best universal testing machine manufacturer and universal testing machine suppliers
Follows are Universal Testing Machine specification :
- Computer control main machine, easy to operate;
- Precise crosshead guidance via steel columns with carriages seated on ball bearings
- Universal software for various material;
- Accurate positioning system with servo motor (Panasonic, Japan) and ball screw lead support;
- Real time display of on-going testing with data, curve, graph, and table by computer;
- Overload, over-current, over-voltage protection, and memory function when power interrupt;
- Wide force range to meet various requirements for testing different materials.
Application of Universal Testing Machine
Universal Tensile Testing Machine is used to carry out the tensile strength test, trapezoid tear resistance test, puncture resistance test and punch through test on geosynthetics or geosynthetic-related products. This tensile test method covers the measurement of load-elongation characteristics, including procedures for the calculation of maximum load per unit width and strain at maximum load. Procedures for measuring the tensile properties of both conditioned and wet specimens are included.
Machine meet with ASTM D4595, ASTM D4533, ASTM D6241, ASTM D3787, ASTM D4833, ASTM D4884, ASTM D4632, ISO 9073.4, ISO 10319, ISO 10321, ISO 12236
If you need more information about Universal Tensile Testing Machine ,please contact with us
Universal Tensile Testing Machine Standard
|ASTM D4595||ASTM D4533||ASTM D6241||ASTM D3787|
|ASTM D4833||ASTM D4884||ASTM D4632||ISO 9073.4|
|ISO 10319||ISO 10321||ISO 12236|
Some standards might not be the full version; to read the full version for free, write an email to [email protected].
Please contact the administrator to get any violations removed.
Key specification of Universal Tensile Testing Machine
|Max. testing force||10KN, 20KN, 50KN, 100KN, 150KN, 200KN
(Please specify before place order)
|Load accuracy||Prior to ±1% of the displayed value|
|Resolution of the linear crosshead’s stroke||0.01mm|
|Max. tensile stroke||600mm or as specified|
|Speed range||0.5~500mm/min, adjustable|
|Power supply||AC220V 50Hz|