skip to Main Content

Whole Shoe Sole Flexing Resistance Tester DW9600

Rated 0 out of 5
(be the first to review)

Whole Shoe Sole Flexing Resistance Tester also named Whole Shoe Flexing Angle Tester, is used to determine the flexing resistance of whole shoe by measuring the force required when a specimen is flexed to a specified angel or the flexed angle when a given force is applied.

Whole Shoe Sole Flexing Resistance Tester DW9600

Whole Shoe Sole Flexing Resistance Tester is used to determine the flexing resistance of whole shoe according to the rigidity test in ISO 20344. The flexing resistance of the specimen can be determined by measuring the force required when a specimen is flexed to a specified angel or the flexed angle when a given force is applied. The forepart of shoe is clamped to the base plate (make sure the flexing line is at the 1/3 length position). A force is applied to flex the shoe at a speed of (100 ± 10) mm/min until (30 ± 0.5) N has been reached. Measure the flexed angle at this point. The instrument uses an encoder to read out the angle value.

Follows are features of shoe flexing angle tester:

  • Two test methods;
  • High precision encoder;
  • Large LCD screen.

Application

Application of shoe flexing angle tester

Shoe flexing angle tester is used to determine the flexing resistance of whole shoe by measuring the force required when a specimen is flexed to a specified angel or the flexed angle when a given force is applied.

Shoe flexing angle tester complies with EN ISO 20344, GB/T 20991, etc.

If you need more information about shoe flexing angle tester, please contact us.

Standards

Whole Shoe Sole Flexing Resistance Tester Standards

EN ISO 20344 GB/T 20991

 

Some standards might not be the full version; to read the full version for free, write an email to [email protected].
Please contact the administrator to get any violations removed.

Key specification

Key specification of shoe flexing angle tester

Specimen French size 42 (UK size 8) or
French size 39 (UK size 6)
Load capacity 500 N
Force resolution 1/100000
Test speed (100±10) mm/min, adjustable
Flexing position 1/3 length of shoe
Angle accuracy 0.1°
Motor Servo motor
Test method Measure angle at a specific force or
force at a specific angle
Power supply AC220V 50Hz
Dimensions 750×450×650mm
Weight 55kg

Reviews

There are no reviews yet.

Be the first to review “Whole Shoe Sole Flexing Resistance Tester DW9600”

You may also like…

Back To Top