Hydrostatic Pressure Resistance Test DW1360
Hydrostatic Pressure Resistance Test is also named Puncture Resistance /geotextile testing or water resistance hydrostatic pressure test.Hydrostatic Pressure Resistance Test is suitable for the measurement of the impermeability of all kinds of geotechnical materials, the performance is stable, convenient and practical.
Hydrostatic Pressure Resistance Test DW1360
Hydrostatic Pressure Resistance Test is used for testing non-woven geotextiles or other materials as base material, polyethylene, polyvinyl chloride, etc.For the non-woven composite geotextile (a film and two cloth membrane) produced for the membrane material, the hydrostatic pressure performance of the sample under the specified water pressure difference condition is obtained.
We provide reasonable price and high quality Hydrostatic Pressure Resistance Test .All of testing instruments manufactured by FYI are well-known throughout China and our engineer can help you installation and training .You can come to our factory to discuss .
Follows are water resistance hydrostatic pressure test :
- 2 test item: resistance to hydrostatic pressure and permeability coefficient;
- 2Cr13 stainless steel clamps and porous board;
- Three time units: hour, minute and second, selectable;
- Pressure mode: Hydraulic pressure and air pressure;
- High-precision pressure measuring device;
Application
Application of Hydrostatic Pressure Resistance Test
Hydrostatic Pressure Resistance Test is used to determine the resistance to hydrostatic pressure and the permeability coefficient of geomembrane, geocomposites consisting of one or two layers of non-woven geotextile and one layer of membrane and other waterproof membrane materials under specified hydraulic pressure differences adpot USA brand sealing ring that provides good sealing performance
Water resistance hydrostatic pressure test complies with GB/T 19979, GB/T 19979.2, JTG E50 T1142 etc international and retailer standards.
If you need more information about Hydrostatic Pressure Resistance Test Machine. Please contact with us
Standard
Standard of Hydrostatic Pressure Resistance Test
| GB/T 19979.1 | GB/T 19979.2 | JTG E50 T1142 |
|---|
Some standards might not be the full version; to read the full version for free, write an email to [email protected].
Please contact the administrator to get any violations removed.
Key specification
Key specification of Hydrostatic Pressure Resistance Test
| Capacity of permeated water collection tube | 15ml |
|---|---|
| Readability of permeated water collection tube | 0.1ml |
| Inner diameter of catchment | Ф200±5mm |
| Diameter of holes on porous board | 3±0.05mm |
| Space between holes on porous board | 6mm |
| Pressure measuring range | 0~2.5Mp |
| Pressure measurement resolution | 0.01Mpa |
| Accuracy of pressure control | ±2% |
| Power supply | AC 220V 50Hz |
| Dimensions | 600×850×1360mm (L×W×H) |
You must be logged in to post a review.
Reviews
There are no reviews yet.