Pendulum Impact Tester for Pipe DW5415DC
The impact toughness of thermoplastic pipes is tested using a pendulum impact tester. The tester is a typical testing tool that is used extensively in educational institutions, companies, and scientific research facilities.
Pendulum Impact Tester for Pipe DW5415DC
DW5415DC Pendulum Impact Tester for Pipe is used for impact toughness testing of thermoplastics pipes. The tester is common testing equipment, which widely used in education school, scientific research units and factories.
This machine complies with the following standards:ISO 9854-1: 2023 Method A (unnotched specimen), GB/T 18743.1-2022
Follows are features of Pendulum Impact Tester
- The impact pendulums are processed by high-precision CNC machine tools with high precision and good consistency;
- The impact pendulum adopts the nut locking installation structure, easy and convenient to replace;
- Equipped with braking device, the impact pendulum can be quickly braking to a static state after impact, and the test operation is safe and efficient;
- The centring device is convenient to operate;
- High-precision photoelectric angle data acquisition device, accurate and reliable test data;
- Touch screen control, can set test parameters, real-time display of impact angle, automatic calculation of impact energy and impact strength, view test results;
- Equipped with protective cover and other safety devices to avoid safety risks caused by misoperation.
Application
Application of Pendulum Impact Tester
The impact toughness of thermoplastic pipes is tested using a pendulum impact tester. The tester is a typical testing tool that is used extensively in educational institutions, companies, and scientific research facilities.
If you need more information about Charpy / Izod Pendulum Impact Testing Machine. Please contact with us.
Standards
Standards of Pendulum Impact Tester
| ISO9854-1: 2023 Method A (unnotched specimen) | GB/T 18743.1-2022 |
|---|
Some standards might not be the full version; to read the full version for free, write an email to [email protected].
Please contact the administrator to get any violations removed.
Key specification
Key specification of Pendulum Impact Tester
| Impact energy | 15J, 50J |
|---|---|
| Resolution | 0.001J |
| Moment of pendulum | pd15=8.03848N·m; pd50=26.79492N·m |
| Impact velocity | 3.8m/s |
| Pre-elevation of pendulum | 150° |
| Measurement accuracy | ±0.1% |
| Angle of striker tip | 30°±1° |
| Tip radius | (2±0.5)mm |
| Corner radius of vice | (1±0.1)mm |
| Support span | 40mm, 70mm |
| Power supply | AC220V, 50Hz |
| Dimensions | 1060×330×920mm (L×W×H) |
You must be logged in to post a review.
Reviews
There are no reviews yet.