skip to Main Content

Charpy Pendulum Impact Tester DW5415C

Rated 0 out of 5
(be the first to review)

Charpy Pendulum Impact Tester, also named Charpy Impact Tester or Dial Charpy Impact Tester. It is used to determine the energy by the impact of the pendulum. The shock energy of the beam can be defined as the energy absorbed by the sample under the action of impact load. It is a performance index, which can be used in the quality control of the production process.

Charpy Pendulum Impact Tester DW5415C  

Charpy Pendulum Impact tester also can be used to compare the toughness of different materials.
Sample horizontally and the ends are not fixed. Release the pendulum and make it impact the sample. The thickness of the test specimen is 80 x 10mm. There is no gap needed .

Charpy Pendulum Impact Tester is used for impact toughness testing of nonmetal material, such as thermoplastic materials, rigid plastic, fibre reinforced composites, nylon, glass fiber reinforced plastics, ceramics, cast stone, electrical insulating material, and so on.

We provide reasonable price and high quality Charpy / Izod Pendulum Impact Tester

All of testing instruments manufactured by FYI are well-known throughout China and more than 50 countries abroad for providing superior value and performance

Follows are features of Charpy / Izod Pendulum Impact Tester

  • Founded with the whole structure, and through aging treatment to relief internal stress, with good rigidity and steadiness
  • Key parts are produced with quality material and processed by special process.
  • In full compliance with standards, easy operation and higher precision and repetition
  • The result is shown by the dial.


Application of Charpy Pendulum Impact Tester

Charpy Pendulum Impact Tester is suitable for the determination of engineering plastics, glass fiber reinforced plastic, ceramic, cast stone, plastic electric appliances, insulation materials, plastic tubing non-metallic materials, such as impact resistant ability.

The IZOD Impact testing machine in test specimens of all kinds of hard materials, from a certain Angle, following a certain weight, can absorb the energy, to determine the toughness of materials.

The tester is common testing equipment, which widely used in education school, scientific research units and factories.


Charpy / Izod Pendulum Impact Tester complies with ISO 9854, GB/T 18743 etc international and retailer standards.

If you need more information about Charpy / Izod Pendulum Impact Testing Machine. Please contact with us.


Standards of Charpy endulum Impact Tester 

ISO9854 GB/T 18743


Some standards might not be the full version; to read the full version for free, write an email to [email protected].
Please contact the administrator to get any violations removed.

Key specification

Key specification of Charpy Pendulum Impact Tester

Impact energy: 15J, 50J
Moment of pendulum: pd15=8.03848Nm
Division value 0-15J: 0.15J; 0-50J: 0.5J
Impact velocity 3.8m/s
Impact center distance 395mm
Pre-elevation of pendulum 150°
Angle of striker tip (30±1)°
Corner radius of impact edge (2±0.5)mm
Display mode dial type
Power supply 100VA, AC 220V, 50HZ
Dimension 550mm×300mm×890mm


There are no reviews yet.

Be the first to review “Charpy Pendulum Impact Tester DW5415C”

You may also like…

Back To Top