skip to Main Content

PROTECTIVE CLOTHING FLAMMABILITY TESTER YG815F

Rated 0 out of 5
(be the first to review)

Flammability tester for protective clothing,also named protective clothing flammability tester,which is used to determine the limited flame spread properties of vertical oriented textile fabrics and industrial products when subjected to a small defined flame.

PROTECTIVE CLOTHING FLAMMABILITY TESTER YG815F 

YG815 F protective clothing flammability tester is used to determine the limited flame spread properties of vertical oriented textile fabrics and industrial products when subjected to a small defined flame.

Here is the features of the machine:

  • The combustion chamber is made of stainless steel, corrosion-resistant;
  • Equipped with two sets of specimen holders for surface ignition and bottom-edge ignition respectively;
  • All specimen holders are made of stainless steel which is corrosion-resistance.
  • Imported burner is used for more stable flame;
  • Pulse high voltage electronic automatic ignition;
  • Automatic ignition, automatic turn off;
  • Imported pressure gauge and regulating valve, the gas pressure is more stable;
  • Imports needle valve, control the flame height precisely;
  • Equipped with a flame height ruler;
  • PLC & touch screen control system, more intelligent; automatically record test data, automatic storage;
  • The procedures of surface ignition and bottom-edge ignition can be switched on the touch screen.

 

Application

Flammability tester for protective clothing YG815F

YG815 F Flammability tester for protective clothing is used to determine the limited flame spread properties of vertical oriented textile fabrics and industrial products when subjected to a small defined flame.

If you need more information about Flammability Tester for protective clothing, please contact with us.

Standards

Standard of Flammability tester for protective clothing

STANDARDS ISO 15025

 

Some standards might not be the full version; to read the full version for free, write an email to [email protected].
Please contact the administrator to get any violations removed.

Key specification

Key specification of Flammability tester for protective clothing

Fuel Standard gas: commercial grade propane (supplied by customer)
Combustion chamber Material: stainless steel

Dimensions: 1,200mm×600mm×1,200mm

Horizontal flame length (25±2)mm for surface ignition
Vertical flame height (40±2)mm for bottom-edge ignition
Flame application time Standard: 10s, settable
After flame time and afterglow time timer Automatic recording, automatic storage,

timer accuracy: 0.1s

Power supply AC220V, 50Hz

Reviews

There are no reviews yet.

Be the first to review “PROTECTIVE CLOTHING FLAMMABILITY TESTER YG815F”

Your email address will not be published.

You may also like…

Back To Top