skip to Main Content

Salt Spray Tester JYWX Serials

Rated 0 out of 5
(be the first to review)

Salt Spray Tester, also named Salt Spray Test Chamber or Salt Spray Corrosion Test Chamber which is used to create and maintain the salt spray (fog) test environment, and test the anti-corrosion quality of the materials surfaces.

Salt Spray Tester JYWX Serials

The Salt Spray (Fog) Testing is a specialized test used to evaluate the resistance to corrosion of paints, coatings, and metal structures as well as effects on electrical systems. Our chambers provide exposure to a salt intensive atmosphere at temperatures matching the proper specification.

Follows are features of Salt Spray Test Chamber specification :

Test methods:

  • Neutral Salt Spray (NSS) test, Salt Spray (SS) test, Acetate Salt Spray (ASS) test, Copper accelerated Acetate Salt Spray (CASS) test etc.

Cabinet materials:

  • l Chamber and liner materials are imported high-strength and corrosion-resistance PVC plastic board, flat and smooth surface, anti-agent, anti-corrosion, easy to clean and without leakage;
  • Chamber cover materials are imported high quality PVC transparent plastic board and easy to view specimen under testing situation;
  • Cabinet body and chamber cover adopts water seal to avoid salt fog leakage;

Spray system:

  • Adopt tower type sprayer (the height of tower tip is adjustable), small fog particles, nature subsidence, nozzle without salt crystalline settlement is adjustable;
  • Spray fog is two stage regulators, and considering oil extraction function;
  • Salt water is storage as built-in tank with large capacity, and equipped with preheating function;
  • Equipped with quartz Water filter to avoid impurity material block up nozzle and stop test;
  • Salt water tank with water high and low water level display.


Application of Salt Spray Tester

Salt Spray Tester is used to test the corrosion resistance reliability of the samples.

Chamber body over-temperature protection,Chamber body low water level protection,Saturator low water level protection, Saturator over temperature protection,Water level low water level notice,Water level high water level notice, Test end notice

The line control board and other components are fixed in a position that is convenient for inspection and maintenance. The open side cover door with door lock is not only beautiful, but also convenient for maintenance. If you need more information about Salt Spray Corrosion Test Chamber. Please contact with us.


Salt Spray Tester standards

ISO 9227 GB/T 10125 ASTM B117


Some standards might not be the full version; to read the full version for free, write an email to [email protected]
Please contact the administrator to get any violations removed.

Key specification

Key specification of Salt Spray Tester

Working chamber size (cm) JYWX-60B:60*40*45
JYWX-90B: 60*90*50
JYWX-120B 80*120*50
JYWX-160B 160*50*100
JYWX-200B 120*200*60
Dimension (cm) JYWX-60B: 110*109*675
JYWX-90B: 84*145*120
JYWX-120B 133*207*125
JYWX-160B: 247*132*144
Power (kw) JYWX-60B: 2.0
JYWX-90B: 2.0
JYWX-120B 3.8
JYWX-160B: 3.8
Chamber temperature range room temperature+5℃~50℃
Saturator temperature range room temperature +5℃~63℃
Temperature fluctuation ≤±0.5℃
Temperature unevenness ≤±1℃
Air pressure 0.2~0.4MPa
Spray pressure 1.00±0.01kgf/cm2
Salt fog condensation speed 1~2mL/80cm2.h
Spray cycle time range 0~999h, H,M,S (programmable)
Testing time setting 0~999h, H,M,S (programmable)
Spraying method pneumatic method, continuous or discontinuous adjustable
Specimen rack 20±5°
Power supply AC220V 50Hz


There are no reviews yet.

Be the first to review “Salt Spray Tester JYWX Serials”

Your email address will not be published.

You may also like…

Back To Top