skip to Main Content

astm d3884 Taber Abrasion Tester YG522N

Rated 0 out of 5
(be the first to review)

Taber Abrasion Tester, also called Taber Abrader or Taber Type Abrasion Tester, can be used for the abrasion resistance test of different materials, cooperated with different standard abrasive wheels. FYI is one of the best manufacturers and suppliers of high quality Taber abrasion tester. We offer cost effective testing solutions and equipments for various industrial applications.


astm d3884 Taber Abrasion Tester YG522N

We provide reasonable Taber abrasion tester  price and high quality for the testing instruments manufactured ,  FYI factory are well-known throughout China and more than 50 countries abroad for providing superior value and performance.

It is designed to conduct wear resistance test for different materials. A rotary specimen abrades against two abrasive wheels with specified load. Use different abrasive wheels for different materials. Resistance to abrasion is evaluated by observing the wear condition or weighting the mass loss after abrasion.

Follows are features of YG522N which meet with astm d3884 

  • Adopt standard abrasive wheel to ensure accuracy test result;
  • Specimen plate can be removed easily, can conduct wet test or thick specimen test;
  • Stop test automatically when rotary number reach the predetermined value;
  • Weights free combination can meet various test load requirements;
  • Multi type standard abrasive wheel can be chosen to fit different materials;
  • A vacuum cleaner can be connected to the tester to remove the wear debris.



Aplication of Taber abrasion tester

Taber abrasion tester is suitable to conduct wear resistance test for different materials, such as cloth, paper, paint, plywood, leather, floor tiles, natural rubber, etc.  Fix the sample on the test turntable, select the required test weight, and ensure that the test grinding wheel does not contact with the sample fixed fixture during the testing process. Adjust the governor switch to the minimum. After setting the test number according to the test requirements, the whole machine is in the test state.

Electronic display of 6 digits, automatic stop. Customer will select different abrasive wheel to meet with different standard.

Taber abrasion tester complies with ASTM D3884, DIN 53863.2, and ISO 5470-1.

If you need more information about Taber abrasion tester, please contact us.


Standards of Taber abrasion tester 

ASTM D3884 DIN 53863.2 ISO 5470-1


Some standards might not be the full version; to read the full version for free, write an email to [email protected]
Please contact the administrator to get any violations removed.

Key specification

Key specification of Taber abrasion tester

Diameter of sample plate Φ90mm
Rotating speed of sample plate 60r/min
Distance between abrasive wheel and sample center 38mm
Sample dimensions Φ110mm, center hole Φ7.5mm
Load weight 125g, 250g, 750g (each 2pcs)
Counter 1~99999, LED display
Power supply AC220V±10%, 200W
Dimension 500×330×330mm(L×W×H)
Weight 30kg


There are no reviews yet.

Be the first to review “astm d3884 Taber Abrasion Tester YG522N”

Your email address will not be published.

You may also like…

Back To Top