skip to Main Content

Izod Impact Strength Tester DW5410A /DW5410B

Rated 0 out of 5
(be the first to review)

Izod Impact Strength Tester, also named Pendulum Impact Tester, Cantilever Beam Impact Testing Machine or ISO 179 Pendulum Impact Tester. It is used to test specimens of all kinds of hard materials, from a certain Angle, following a certain weight, can absorb energy, to determine the toughness of the material.

Izod Impact Strength Tester DW5410A/DW5410B  

Izod Impact Strength Tester is used for impact toughness testing of nonmetal material, such as thermoplastic materials, rigid plastic, fibre reinforced composites, nylon, glass fiber reinforced plastics, ceramics, cast stone, electrical insulating material, and so on.

We provide reasonable price and high quality Izod Impact Strength Tester.

All of testing instruments manufactured by FYI are well-known throughout China and more than 50 countries abroad for providing superior value and performance.

Follows are features of the tester

  • Founded with the whole structure, and through aging treatment to relief internal stress, with good rigidity and steadiness
  • Key parts are produced with quality material and processed by special process.
  • In full compliance with standards, easy operation and higher precision and repetition
  • The result is shown by the dial.

Application

Application of Izod Impact Strength Tester 

Izod Impact Strength Tester is used for the determination of impact toughness of non-metallic materials such as rigid plastic sheet, pipe, special-shaped material, reinforced nylon, glass steel, ceramic and cast stone. Convenient, accurate, beautiful shape.

Pendulum at 150 ° Angle free drop impact specimen, fracture of specimens after hit by, and the pendulum at the other end to less than 150 ° Angle increases, Angle decreased in the following reasons:

The tester is common testing equipment, which widely used in education school, scientific research units and factories.

  1. The specimen itself has an impact energy (impact value).
  2. Friction of impact process, wind resistance loss.
  3. The pointer friction of the impact machine: inertia loss, so the impact value of the specimen can be calculated by calculation.

 

Izod Impact Strength Tester complies with ISO 179, GB/T 1043 , GB/T 2611 etc international and retailer standards.

If you need more information about Izod Impact Strength Testing Machine. Please contact with us

Standards

Standards of Izod Impact Strength Tester

ISO 179 GB/T 1043

 

Some standards might not be the full version; to read the full version for free, write an email to [email protected].
Please contact the administrator to get any violations removed.

Key specification

Key specification of Izod Impact Strength Tester 

Impact energy 15J, 50J
Impact energy DW5415A DW5415A: 0.5J、1J、2J、4J、5J
DW5415B: 7.5J, 15J, 25J, 50J
Moment of pendulum DW5415A: pd0.5=0.26795Nm
pd1=0.53590Nm
d2=1.07180Nm pd4=2.14359Nm
d5=2.67949Nm
DW5415B: pd7.5=4.01924Nm
pd15=8.03848Nm
d25=13.39746Nm
pd50=26.79492 Nm
Division value DW5415A:
0.005J (0~0.5J)
0.010J(0~1.0J)
0.020J (0~2.0J)
0.040J(0~4.0J)
0.050J (0~5.0J)
DW5415B: 0.075J (0~7.5J),
0.150J (0~15.0J)
0.250J ( 0~25.0J)
0.500J (0~50.0J)
Impact velocity DW5415A DW5415A: 2.9m/s
DW5415B: 3.8m/s
Impact center distance DW5415A: 230mm
DW5415B: 395mm
Pre-elevation of pendulum 150°
Angle of striker tip (30±1)°
Corner radius of impact edge (1±0.1)mm
Display mode dial type

Reviews

There are no reviews yet.

Be the first to review “Izod Impact Strength Tester DW5410A /DW5410B”

Your email address will not be published.

You may also like…

Back To Top