Tender for Laboratory Equipment from Jashore University of Science and Technology

Tenderer

Jashore University of Science and Technology, popularly known as JUST, is a government-aided public university in Bangladesh. JUST is located in Sadhinata Sarak, Jessore Sadar Upazila, Khulna District. Its postal code is Jessore-7408. It is the fourth public university in Khulna District and the first public university in Jessore.

JUST is committed to being an institution of excellence and was recently ranked among the top five universities in Bangladesh, ranked 801-1000 in the prestigious Times Higher Education World University Rankings 2025. JUST has also demonstrated its strength in research and innovation, with notable achievements such as its faculty members being ranked among the top 2% of the world’s “most cited scientists” and receiving prestigious recognition at the national and international levels. These achievements reflect their shared dedication to academic excellence, innovation and impactful contributions.

Recently Jashore University of Science and Technology issued a tender for laboratory equipment. As one of the most advanced textile equipment manufacturers, Hefei Fanyuan also participated in this tender. Here are the details about these machines.

Product of the bidding project

Sample Ring Spinning Frame

Key Specification:

Control mode: Touch screen & PLC

Spindle Gauge: 50-80 mm

No. of spindles: 6-12 Nos.

Spindle Length: 205mm

Draft type: Three roller, Long and short aprons,

Draft range: 10-50

Draft Control: Automatic,

Roller Diameter: Front Roller-Φ25mm,

Middle Roller- Φ25mm.

Back Roller- Φ25mm,

Ring Diameter: 40-45 mm

Yarn Count/ density range:6-99tex(6-100Ne)

Twist: 200-2,000(Twist/m)

Twist Direction: ZorS

Spindle Speed: 12000-20,000 rpm

Capacity: 150g/h (Approx.)

Power Supply: AC 220V, %50Hz

Dimension:910x850x1640mm

Circular Weft Knitting S/J Machine

Features:

*High speed single jersey knitting machine.

* The exquisite structure design makes it more convenient to replace the needle cylinder.

* Through different triangular arrangement, cloth of various organizations can be produced, such as: mercerized cotton, polyester cover cotton, color strip cloth, cabbage melon cloth, cotton spandex sweat cloth, etc.

* The products are used for undershirt, T-shirt, sportswear, rhythm suit, swim suit and so on.

Specification:

Knitting Method: Single jersey

Computerized: Yes

Cylinder Dia: 22″-68″

Guage: 22G-44G

No. of Feeder: 60-408 F

Feeder Type: positive Storage Feeder

Number of Trucks: 1

Speed: 16-30RPM

Creel: Four side bobbin creel

Horse power: 2-11.5HP

Power Supply: AC 380V, 3 Phase, 50Hz.

Rapier Sample Loom (Fully Automatic)

Features:

• Consists of control part (computerized control platform) and mechanical part (loom);

• Electronic control take-up mechanism driving by stepper motor and reducer, 10~300pcs/inch of weft density.

• Stepper motor driving active let-off device, automatically adjust warp tension;

• Pneumatic control element can control 20pcs heald frames at most, easy to mount and dismount heald frame;

• Heald frame adopts die drawing aluminum alloy profile, with hard oxidation wear-resisting treatment;

• Pneumatic controlled weft inserting with rigid rapier, suitable for cotton, terylene/cotton, chemical fiber and other fabrics;

• Adjustable pneumatic controlled beating-up mechanism, large force and adjustable moment of force, suitable for fabrics of high count and high density;

Specification:

• Theoretical Width: 12′.16″, 20″,24″,28″ or 32″

• Yarn Range:5-500tex

• Speed: 25-40 weft/min, adjustable,

• Color selection: 8 Color Full automatic, pneumatic control,

• Heald Frame Position: 20 (including two heald frames for selvedges),

• Take-up: Stepper motor control,

• Let-off: Active electronic control

• Shedding: Computer control pneumatic,

• Weft insertion: Pneumatic control, (Optional servo motor driving)

• Air Consumption:600L/minute (Maximum),

• Air Pressure: 0.45-0.75MPa,

• Power Supply: AC 220V, 50Hz.

*All required accessories including air compressor.

Sample Dyeing Machine (Infrared Lab Dyeing Machine)

Technical Specification:

a. Number of Staining cup/Beaker: 12

b. Staining cup volume:300cc

c. Liquor ratio: 1:5-1:100

d. Rotation Speed:0~60Rpm

e. Temperature range: RT-140°C

f. Heat Method: Infrared.

g. Heating rate:0-3.5°C/min

h. Max.Heatingpower:4×1.2KW

i. Temperature range: RT~140°C

j. Temperature control accuracy: ±0.2°C

k. Cooling rate:0.2-5°C

1. Control mode: LCD Microprocessor type,

programmable process number: 100(0-99), 100 Programmable steps per process

m. Cooling method: Air cooled.

n. Drive Motor Power: 370W

o. Power Supply: AC380V, 50Hz, 3 Phase

p. Dimension: W670, L670, H780 mm.

Mini Stenter

Features:

• Brushed stainless steel construction, good heat- insulated performance.

•Cyclic hot air system, automatic temperature control.

•Pin-frame automatically transported into drying chamber with adjustable load times from 1-999s, audible alarm when loading complete.

•Four direction adjustable pin-frame to mount the samples with various tension as required.

Technical Specification:

•Temperature range: 20~250°C

• Testing time range: 1-999s

•Pin-frame size: 340x400mm

•Effective Pin- frame size: Min. 95mmx160mm, Max.

275mmx335mm

•Power Supply: 3 phase, AC 380V, 50Hz,

•Dimension:1320x660x800mm (LxWx11)

•Weight: 160KG.

Mini Flat Screen-Printing Machine/Lab Printing Machine

Feature:

•Most famous printing board from HABASIT, Switzerland:

•Screen frame from Europe;

•Motor and control system from Japan and Taiwan;

•Linear bearing from Germany;

•Stainless steel construction;

•Easy hand operated;

•Desk top, easy to maintain;

Technical Specification:

•Printing area: 450*-350mm

•Screen Frame Size: 720*480mm

•Magnetic Stick: 08,12, 16, 20mm 350mm in length

•Speed: 0.6-6m./minute

•Magnetic Force: Grade 1-10

•Power Supply: AC220V, 50Hz,

•Dimension:1030x780x960mm

•Weight: 125KG

Textiles Testing Machine /Electronic Strength Tester

Features:

•The machine adopt AC servo driven system, reducer, synchronous pulley.

•Adopt aluminum column shell, deal with high temperature & solidity injection on the machine surface will never fade.

•Adopt many kinds of protection measures; Beam’s limit cams protecting device, Clamp touch avoid protecting device, Set up protection on displacement & load software, Sensor overload protection, Sample load software protection, Over current & overvoltage protection.

•Real time supervision to main parts, more safe & reliable while using.

•Adopt open system: User can edit test program, data analysis formula, test report according to test material’s category, character and test methods requires.

•Manual and pneumatic clamp are optional;

Key Specification:

•Display: Computer Display

•Max. Capacity: 5KN,

•Force Accuracy: ≤+/-0.2%F.S

• Force Resolution: 1/100000

•Stroke: 1000mm

•Test Speed:0.01-1000mm/min

•Stop mode: Overload stop, emergency stop button, specimen damage automatic stop, upper & lower limit set automatic stop, automatic return function.

• Machine Drive: Servo motor drive, Synchronous wheel and precision ball screw drive.

•Power: 200w.

•Power Supply: AC 220V, 50 Hz.

•Dimension:670x480x1440mm,

•Standard:15013934-1, 13934-2. ISO13935-1, ISO13935-2.ISO13936-1, ISO13936-2, ISO13936-3, ISO13937- 2. ISO13937-3, ISO13937-4,1421,2411,2062,4674- 1.5082,

9073.3,9073-4,9073.18, BS 2543, 2576,3320, 3424,4303.

M&S P11, P12, P13, P14. JIS L1096. ASTM D434, D751, D885, D1683, D1683, D2261, D2724, D2731, D3787, D4034, D4964, D5034, D5035, D5587, D 5733, D5735.

Standard Accessories:

a. Pneumatic Grips- 1 set,

b. Operation software (English)-1pc,

c. Cable connect with PC-1 pc

d. Load Cell-1pc

e. Computer – 01 Set