skip to Main Content

Ozone Aging Test Chamber DW5610

Rated 0 out of 5
(be the first to review)

Ozone Aging Test Chamber, also named Static Ozone Aging Test Chamber or Ozone Test Chamber, it is used to simulate the ozone in the atmosphere conditions, check the effect of ozone on rubber, rapid identification and evaluation of rubber ozone aging resistance and antiozonant shielding efficiency of the method, and then take effective measures, the anti aging in order to improve the service life of rubber products.

Ozone Aging Test Chamber

The Ozone Aging Test Chamber manufactured by FYI based on a diverse range of testing requirements or standards. Engineers available to service machinery overseas. Of course, we also have agents and distributors to assist you timely in over 20 countries around the world.

Ozone Aging Test Chamber which also named Static Ozone Aging Test Chamber or Ozone Test Chamber, This instrument is simulation and strengthen the ozone in the atmosphere conditions, studied the effect of ozone on rubber, rapid identification and evaluation of rubber ozone aging resistance and antiozonant shielding efficiency of the method, and then take effective measures, the anti aging in order to improve the service life of rubber products.

Follows are features of the chamber

  • American OS-4 ozone monitor;
  • Air regulator to control ozone concentration;
  • AC receiver drier to control RH;
  • FUJI digital temperature controller;
  • Chamber is made of 2mm 304SUS;
  • Shell is made of 5mm cold-roll steel sheets with electrostatic spraying;
  • Observation window is made of toughened glass;
  • Accelerated aging test chamber with stainless steel heater;

Application

Application of Ozone Aging Test Chamber

Ozone Aging Test Chamber is used to estimate the effect of exposure, under surface tensile strain conditions, either dynamic or static, in an atmosphere containing specified levels of ozone concentration, also can determine the resistance of the color of textile in ozone atmosphere, different temperature and relative humidity.

According to the test method and standard, it can be divided into “static” and “dynamic”. Static refers to the sample being stretched and released into the test box for testing. DW5610 is belongs to Static Ozone Aging Test Chamber.

The reasonable position of the box door is provided with a transparent window to observe the changes of indoor samples.

Ozone Aging Test Chamber complies with AATCC D1149-07, AATCC 109, ISO 105-G03etc international and retailer standards.

If you need more information about Ozone Aging Test Chamber Machine. Please contact with us.

Standards

Standards of Ozone Aging Test Chamber

AATCC D1149-07 AATCC 109 ISO 105-G03

Key specification

Key Specification of Ozone Aging Test Chamber

Temperature range 5~40℃ ±0.1℃
Temperature uniformity ±2℃
Temperature fluctuation ±0.5℃
Relative humidity range 20~95%
Ozone concentration 0.03~19.99ppm
Ozone deviation ≤10%
Air flow 2~25L/min
Time setting 0~999h
Dimensions of chamber 500×500×600mm (L×W×H)
Dimension of machine 1000×950×1600mm (L×W×H)
Power supply AC220V, 50Hz
Weight 120kg

FAQs

FAQs

Q:If the DW5610C Ozone Exposure Chamber Ozone Aging Test Machine can give a volume fraction of 0,5×10-6 as concentration.

A: YES; 0.5*10-6 is 50pphm(ISO 1431-1 requires this concentration), dw5610c ozone concentration range is 0-1000pphm.

Reviews

There are no reviews yet.

Be the first to review “Ozone Aging Test Chamber DW5610”

You may also like…

Back To Top