skip to Main Content

IULTCS Color Fastness Tester DW9890

Rated 0 out of 5
(be the first to review)

IULTCS Color Fastness Tester, also named IULTCS & Veslic Leather Abrasive Tester, which is used to determine the amount of ‘marring’ of the leather surface of dyeing or lining of leather in the experiment of rubbing to assess the amount of color transfer. It can be used as dry and wet rubbing two kinds of test.

Category:

IULTCS Color Fastness Tester DW9890  

IULTCS Color Fastness Tester is used to determine the color fastness to rubbing and wear resistance test for leather and lining of shoes. This machine is designed to carry out the rub fastness test on the surface of leather so as to determine the amount of marring of the leather surface or finish and the amount of color transfer to the rubbing pad.

Test method based on dry or wet white wool cloth, hammer on the friction surface, and then the specimens of reciprocating friction clamp on the test bench

IULTCS Color Fastness To Rubbing Test with power off memory function

Follows are IULTCS Color Fastness Tester specification :

  • LCD display;
  • Stainless steel load;
  • Simple operation, high performance and low noise.

Application

Application of IULTCS Color Fastness Testerer 

IULTCS Color Fastness Tester is suit for leather, textile, belt, trademark, cardboard and other materials to be damaged by rubbing to assess the amount of color transfer.

Under the pressure of rules, using a specified baize of leather surface of reciprocating friction test, the number of test rules, the use of the grey scale for wool felt, compare the color change of the surface of leather surface, determine the class and record any loss, damage or visible change leather surface.

If you need more information about IULTCS Color Fastness Tester Please contact with us .

Standards

IULTCS Color Fastness Tester Standard

ISO 20344
SATRA TM177
ISO 11640
Adidas GE-29
DIN 53339 SATRA TM173

 

Some standards might not be the full version; to read the full version for free, write an email to [email protected].
Please contact the administrator to get any violations removed.

Key specification

 Key specification of IULTCS Color Fastness Testerer 

Abrasion stroke 35±2mm
Specimen size 120×20mm
Test block size 15×15mm
Test speed 40±2cpm
Pillar load 500±25g
Load weight 500±10g
Counter LCD, 0~999999
Power supply AC220V 50Hz
Dimension 310×430×480mm (L×W×H)

Reviews

There are no reviews yet.

Be the first to review “IULTCS Color Fastness Tester DW9890”

You may also like…

Back To Top