skip to Main Content

Geotextile Abrasion Resistance Tester DW1250

Rated 0 out of 5
(be the first to review)

Geotextile Abrasion Resistance Tester,also named ISO 13427 Geotextile Abrasion Resistance Tester which is a test instrument for the abrasion resistance of geotechnical materials. Place the tested sample on a stationary upper plate and clamp the sample with a clamp on both ends of the plate. Place the abrasive on the lower plate of the reciprocating motion, clamping at both ends of the plate with clamps.

Geotextile Abrasion Resistance Tester DW1250

Geotextile Abrasion Resistance Tester is used to testing the wear properties of woven geotextiles, non-woven geotextiles and related tea products. Fix the specimen on platform, under the condition of pressure and friction action, make the abrasive with prescribed surface properties and friction, the final test before and after the friction, tensile strength, percentage and strength loss to describe the wear resistance of the sample performance

We provide reasonable price and high Abrasion Resistance Tester Geotextile

All of testing instruments manufactured by FYI are well-known throughout China and more than 50 countries abroad for providing superior value and performance.

Follows are Geotextile Abrasion Resistance Tester specification :

  • Made of stainless steel;
  • Number of cycles are adjustable;
  • Abrasion resistance tester easy to use;
  • The high precision wheel spoke load sensor has high precision and good stability;
  • The fixture is specially designed, the clamp is firm, easy to operate, no clamping phenomenon.

Application

Application of Geotextile Abrasion Resistance Tester

Geotextile Abrasion Resistance Tester is used to determine the resistance of geotextile or geotextile-related products to abrasion using an abrasion tester by sand paper/sliding block method. It is only applicable to geotextile, not to geomembranes, geogrids. A predetermining electro-magnetic counter allows the sample to be abraded to the desired number of strokes.

The special process guarantees the coaxiality of the test machine, which eliminates the influence of irregular sample on the sensor.

Geotextile Abrasion Resistance Tester complies with ISO 13427 etc international and retailer standards.

If you need more information about Geotextile Abrasion Resistance Testing machine. Please contact with us.

Standard

Standard of Geotextile Abrasion Resistance Tester 

ISO 13427

 

Some standards might not be the full version; to read the full version for free, write an email to [email protected].
Please contact the administrator to get any violations removed.

Key specification

Key specification of Geotextile Abrasion Resistance Tester

Effective abrasion area 50mm×200mm
Speed of the reciprocating plate 90 cycles per minute
Stroke length 25±1mm
Load (including the upper plate and the dead weight) 6±0.01kg
Range of the counter 1~9999 cycles, settable
Power supply AC220V 50Hz

Reviews

There are no reviews yet.

Be the first to review “Geotextile Abrasion Resistance Tester DW1250”

You may also like…

Back To Top