skip to Main Content

Hydrostatic Pressure Resistance Test DW1360

Rated 0 out of 5
(be the first to review)

Hydrostatic Pressure Resistance Test is also named Puncture Resistance /geotextile testing or water resistance hydrostatic pressure test.Hydrostatic Pressure Resistance Test is suitable for the measurement of the impermeability of all kinds of geotechnical materials, the performance is stable, convenient and practical.

Hydrostatic Pressure Resistance Test DW1360 

Hydrostatic Pressure Resistance Test is used for testing non-woven geotextiles or other materials as base material, polyethylene, polyvinyl chloride, etc.For the non-woven composite geotextile (a film and two cloth membrane) produced for the membrane material, the hydrostatic pressure performance of the sample under the specified water pressure difference condition is obtained.

We provide reasonable price and high quality Hydrostatic Pressure Resistance Test .All of testing instruments manufactured by FYI are well-known throughout China and our engineer can help you installation and training .You can come to our factory to discuss .

Follows are water resistance hydrostatic pressure test :

  • 2 test item: resistance to hydrostatic pressure and permeability coefficient;
  • 2Cr13 stainless steel clamps and porous board;
  • Three time units: hour, minute and second, selectable;
  • Pressure mode: Hydraulic pressure and air pressure;
  • High-precision pressure measuring device;

Application

Application of Hydrostatic Pressure Resistance Test 

Hydrostatic Pressure Resistance Test is used to determine the resistance to hydrostatic pressure and the permeability coefficient of geomembrane, geocomposites consisting of one or two layers of non-woven geotextile and one layer of membrane and other waterproof membrane materials under specified hydraulic pressure differences adpot USA brand sealing ring that provides good sealing performance

Water resistance hydrostatic pressure test complies with GB/T 19979, GB/T 19979.2, JTG E50 T1142 etc international and retailer standards.

If you need more information about Hydrostatic Pressure Resistance Test Machine. Please contact with us

Standard

Standard of Hydrostatic Pressure Resistance Test

GB/T 19979.1 GB/T 19979.2 JTG E50 T1142

 

Some standards might not be the full version; to read the full version for free, write an email to [email protected].
Please contact the administrator to get any violations removed.

Key specification

Key specification of Hydrostatic Pressure Resistance Test

Capacity of permeated water collection tube 15ml
Readability of permeated water collection tube 0.1ml
Inner diameter of catchment Ф200±5mm
Diameter of holes on porous board 3±0.05mm
Space between holes on porous board 6mm
Pressure measuring range 0~2.5Mp
Pressure measurement resolution 0.01Mpa
Accuracy of pressure control ±2%
Power supply AC 220V 50Hz
Dimensions 600×850×1360mm (L×W×H)

Reviews

There are no reviews yet.

Be the first to review “Hydrostatic Pressure Resistance Test DW1360”

You may also like…

Back To Top