skip to Main Content

In-plane Water Discharge Capacity Test DW1370

Rated 0 out of 5
(be the first to review)

In-plane Water Discharge Capacity Test , also named In-plane Water Discharge Capacity Test Apparatus which is used to determine the in-plane water discharge capacity of prefabricated vertical drains (PVD) under a specified pressure. The design pattern of Water Discharge Capacity has great influence on the test result of plastic drain board.Sample will be subjected to uniform and constant lateral pressure.

In-plane Water Discharge Capacity Test DW1370 

In-plane Water Discharge Capacity Test is used to determine the in-plane water discharge capacity of prefabricated vertical drains (PVD) under a specified pressure.

The plastic drain board is also the soil polymer drainage belt, plastic plate, is a kind of commonly used ribbon drainage material, its section width is l0cm, the thickness is about 5mm. Its quality index is mainly composed of complex and filter membrane tensile strength and longitudinal water.

We provide reasonable price and high quality In-plane Water Discharge Capacity testing machine

All of testing instruments manufactured by FYI are well-known throughout China and more than 50 countries abroad for providing superior value and performance.

Follows are In-plane Water Discharge Capacity Test specification :.

  • Two components: main body and water tower;
  • Spiral water tower can adjust the water had easily;
  • Water tower consists of the base, vertical pole and a bucket; The bucket can be moved up or down along the vertical pole through the mechanism of handle-wheel and pulley;
  • Adjustable water head difference in water tower;
  • Air compressor to supply air pressure;
  • Air controller to control the supplied air pressure and to allow or stop compressed air into test cell so different cell pressures can be provided;
  • All components made of stainless steel and water-proof plastic.

Application

Application of In-plane Water Discharge Capacity Test

In-plane Water Discharge Capacity Test is used to determine the in-plane water discharge capacity of prefabricated vertical drains (PVD) under a specified pressure.

The principle is through the water pump will overflow the water in the tank container such as work, is full of water in the container, then start the pump, as the pressurizer pressure, through the intelligent table control hydraulic pressure control, again by pressure vessel will work passed into the pressure vessel, Thus pressure can be balance

In-plane Water Discharge Capacity Test complies with SL/T 235, JTG E50 T1143 etc international and retailer standards.

If you need more information about In-plane Water Discharge Capacity Test . Please contact with us

Standard

Standard of In-plane Water Discharge Capacity Test

SL/T 235 JTG E50 T1143

 

Some standards might not be the full version; to read the full version for free, write an email to [email protected].
Please contact the administrator to get any violations removed.

Key specification

Key specification of In-plane Water Discharge Capacity Test

Effective length of specimen 400mm
Width of specimen 100mm or customized
Thickness of specimen 4~14mm
Range of head loss 0~400mm, adjustable
Accuracy of head loss ±1mm
Lateral pressure 0~350kPa
Dimensions of main body 700×450×385mm (L×W×H)
Dimensions of water tower 235×200×860mm (L×W×H)
Weight Approx. 42kg

Reviews

There are no reviews yet.

Be the first to review “In-plane Water Discharge Capacity Test DW1370”

You may also like…

Back To Top