16 CFR 1610 Fabric Flammability Tester YG815D
Fabric Flammability Tester, also named AFCC 45° flammability tester, The AFCC 45° Flammability Tester is used to the burning characteristic of textiles. The burning characteristic is expressed by the flame spread rate.
16 CFR 1610 Fabric Flammability Tester YG815D
Fabric Flammability Tester is used to the burning characteristic of textiles. The burning characteristic is expressed by the flame spread rate.
Follows are features of flammability tester:
- LCD display of time;
- Stainless steel structure, convenient to clean;
- Flow-meter for adjusting flame height;
- Heat-resistant glass window, convenient to operate and observe;
- Metal buttons, beautiful, elegant and not easy to break;
The results show that the flame retardant properties of blended fabrics are better than those of pure textiles. Nomex and Lenzing Viscose FR blends improve the flame-retardant properties of the fabric, also improve yarn spinnability and reduce the cost of the fabric.
For more information about flammability test chamber, you can also visit www.fyichina.com.cn.
Application
Application of AFCC 45°Flammability Tester
AFCC 45°Flammability Tester is used to the burning characteristic of textiles. The burning characteristic is expressed by the flame spread rate. It is used to classify products of apparel fabric, toy fabric and furniture fabric, etc., to prevent the use of any dangerous products and to decrease any danger that threats to life.
If you need more information about AFCC 45°Flammability Tester, please contact with us.
Standards
AFCC 45°Flammability Tester Standard
| STANDARDS | GB/T 14644 | ASTM D1230 | 16 CFR 1610 |
Some standards might not be the full version; to read the full version for free, write an email to [email protected].
Please contact the administrator to get any violations removed.
Key specification
Key specification ofAFCC 45°Flammability Tester
| Igniter caliber | 4 1/2 syringe needle |
| Angle of specimen rack | 45° |
| Space between top of igniter and space | 8mm |
| Measuring range of flow-meter | 0~60ml/min |
| Required pressure of gas supply | ≤0.2Mpa |
| Flame height | 16mm |
| Igniting time | 0~99.99s, settable
Standard: 1s |
| Timing range | 0.1s～9h59min59.9s |
Carlota –
Great manufacturers of flammanility tester! The machine is good. I hope this machine will run in a long span.
Kerwin Conan –
Quick shipping and well-packaged!