Fiber Thermal Shrinkage Tester XH-1/XH-1A
FYI is one of the best Fiber Thermal Shrinkage Tester suppliers in the world. We offer good-quality products at an affordable price. The fiber thermal shrinkage tester is of special design, R&D, we provide not only good-quality products but also the best after-sales service.
Fiber Thermal Shrinkage Tester XH-1/XH-1A
XH-1 Series Fiber Thermal Shrinkage Tester is used to conduct the thermal shrinkage test of synthetic staple fibers, e.g. polyester fiber, nylon fiber, polypropylene fiber and so on.
It measures the length of each fiber on the sample cylinder with a camera, obtains the change of fiber length before and after it is thermally treated, and then automatically calculates the average thermal shrinkage and CV of the fibers. The testing process is monitored by a computer and the testing data are displayed automatically.
XH-1A is the upgraded version of XH-1, adopting optimized structure design and high precision components, can complete sample heating and testing automatically.
Fiber Thermal Shrinkage Tester complies with FZ/T 50004 etc international and retailer standards.
The following are the features of the machine:
- Finely constructed with high automation to reduce the repetitive manual labor and improve the efficiency;
- XH-1 equipped with one cylinder support, convenient to load specimens onto the sample cylinder;
- XH-1 equipped with two sample cylinders, the test efficiency is greatly improved.
- The software design is straightforward. The test report can be printed directly, or can be exported into EXCEL format, convenient for operation.
- The results are precise and reproducible;
- High precision components for XH-1A, including precision ball screw, precision sensor, built-in industrial video camera, mechanical hand that can move up, down, left and right, built-in precision oven, etc.;
- The tension clamp can be customized to provide suitable pre-tension.
For more information, you can also visit www.fyichina.com.cn.
Application
Application of Fiber Thermal Shrinkage Tester
Fiber Thermal Shrinkage Tester applies to the dry thermal shrinkage test of synthetic staple fibers, e.g. polyester fiber, nylon fiber, polypropylene fiber and so on. It measures the length of each fiber on the sample cylinder with a camera, obtains the change of fiber length before and after it is thermally treated, and then automatically calculates the average thermal shrinkage and CV of the fibers. The testing process is monitored by a computer and the testing data are displayed automatically. XH-1A is the upgraded version of XH-1, adopting optimized structure design and high precision components, can complete sample heating and testing automatically.
If you need more information about Fiber Thermal Shrinkage Machine. Please contact with us
Standards
Standards of Fiber Thermal Shrinkage Tester
| FZ/T,50004 |
|---|
Some standards might not be the full version; to read the full version for free, write an email to [email protected].
Please contact the administrator to get any violations removed.
Key specification
Key Specification of Fiber Thermal Shrinkage Tester
| Model No. | XH-1 | XH-1A |
|---|---|---|
| Measuring range of thermal shrinkage | 0~25% | 0~45% |
| Measuring error of thermal shrinkage | ≤±0.1% | ≤±0.1% |
| Measuring accuracy of sample length | ±0.01mm | ±0.01mm |
| Gauge between upper and lower clamps | 20mm±1mm | 20mm±1mm |
| Number of fibers tested on sample cylinder | 35 | 36 |
| Oven | Excluded | Included |
| Temperature range of oven | / | RT ~ 250oC, settable |
| Temperature accuracy of oven | / | ±0.1oC |
| Tension clamp | 0.117cN/pc | 0.5cN/pc |
| Compressed air | / | (0.4~0.8)MPa, Provided by customer |
| Power supply | AC220V, 50Hz | AC220V, 50Hz |
| Package volume | 0.4cbm | 1cbm |
| Gross weight | 70kg | 140kg |
According to the standard FZ/T-50004, pretension should be (0.075±0.0075) cN/dtex. Please inform us fiber count before placing order if you need other pre-tension.
You must be logged in to post a review.
Reviews
There are no reviews yet.