Laboratory Hot Melt Coating Laminating Machine MU578

Laboratory Hot Melt Coating Laminating Machine MU578

MU578 Laboratory Hot Melt Coating Laminating Machine with thermoplastic adhesive powder applicator is suitable to produce coated samples of hot melt adhesives, and then laminating to a variety of textile fabrics, foils, films, and papers.

Follows are the specifications:

1. Self-contained brake unwinds for adhesive carrier and face stock.
2. Use 220V or 380V/50Hz electric power.
3. Pivot control on adhesive carrier and face stock to control web alignment.
4. Laminating speed and pressure are controllable.
5. Operating temperature till 250℃.
6. Easily clean up accomplished through quick uncomplicated disassembly.
7. Generates sample laminates as long as needed.
8. Equipped with precision ground coating bars
9. Both coating bars and the back reservoir are heated independently.(optional)
10. Equipped with a variable speed controller that can be adjusted.
11. The non-rotating bars are separated from the reservoir, with PT-100 high-precision PID temperature control mode.
12. Using a high precise micrometer to adjust the coating gap to control coating thickness, and show the coating thickness through grating scale. The resolution has to be 0.05mm or less, that is the minimum coating thickness is 0.05mm or less.
13. The maximum coating width 300mm. The width of coating can be controlled by side dams. The precision hot melt coater is capable of producing coated samples, and small production. It can coat for an unlimited length tape, and automatic winding.
14. Reversible speed controller can be adjusted, and the best coating speed should be more than 3m/min and less than 10m/min.
15. The coated liner bar can be adjusted to control the roll tension.
16. The heating bar, the rubber roller and reservoir can be quickly disassembled separated from the host, to easily clean adhesive residue.
17. Stainless steel construction.