Notched Constant Tensile Load Tester DW1440
Notched Constant Tensile Load Tester,which also named Environmental Stress Cracking Tester or ASTM D5397-99 Enviromental Stress-cracking Tester.It is used to determine the environmental stress cracking ability of ethylene – based tree ester and plastic. It is suitable for the original granule of cable sheath.
Notched Constant Tensile Load Tester DW1440
Notched Constant Tensile Load Tester is mainly used for stress cracking test of polyethylene plastics.
It includes a Nicking Jig, bending clamp, transfer tool, specimen holder, test tubes and stoppers and a constant-temperature batch. Customer need make a specific notch on each test pieces by using the nicking jig,bend notched test pieces on the bending clamp, transfer bent notched test pieces onto the specimen holder by the transfer tool, pour the reagent into test tubes and insert specimen holder with test pieces into the test tube so that test pieces are immerged in the reagent and then place test tubes with test pieces and reagent in it into the constant-temperature bath for a specific time
We provide reasonable price and high quality Environmental Stress Cracking Tester
Follows are features of Notched Constant Tensile Load Tester
- Easy use and long operating life;
- The experimental device has retained the technical requirements of the prototype device and has been innovated in structure. The equipment is perfect in structure and advanced in technology.
Application
Application of Environmental Stress Cracking Tester
Environmental Stress Cracking Tester is specially designed to determine the susceptibility of ethylene plastics to environmental stress-cracking under specified conditions of temperature, stress and surface-active agent. It consists of a constant-temperature bath, notch jig for making imperfection, bending clamp, transfer tongs and specimen holders.
Environmental Stress Cracking Tester complies with GB/T 1842-1999, ASTM D1693-2008 etc international and retailer standards.
If you need more information about Environmental Stress Cracking Tester Machine. Please contact with us.
Standards
Environmental Stress Cracking Tester standards
GB/T 1842-1999 | ASTM D1693-2008 |
---|
Some standards might not be the full version; to read the full version for free, write an email to [email protected].
Please contact the administrator to get any violations removed.
Key specification
Key specification of Environmental Stress Cracking Tester
Volume of constant-temperature bath | 50L |
---|---|
Temperature | 50oC±0.5oC (water as heat conduction medium) 100oC±0.5oC (oil as heat conduction medium) |
Specimen size | 38×13mm |
Notch length | 19±0.1mm |
Max. notch depth | 3.5mm |
Power supply | AC220V 50Hz, single-phase |
Reviews
There are no reviews yet.