skip to Main Content

Pipe Cutting/Chamfering Machine XGQ-630

Rated 0 out of 5
(be the first to review)

Pipe Cutting and Chamfering Machine, also named Plastic Pipe Cutting and Chamfering Machine or Laboratory Pipe Chamfering Machines. It is used for cutting and chamfering of large sized plastic pipes, which can be used with plastic pipe extrusion line. It has the characteristics of good cutting effect, high degree of automation, complete protection device, convenient installation and use, beautiful appearance, etc.

Pipe Cutting and Chamfering Machine XGQ-630

Pipe Cutting and Chamfering Machine is used for cutting and chamfering big plastic pipes. It can be used together with plastic pipe extrusion production line. It is suitable for pipe manufacturers, quality inspections and research institutions.

We provide reasonable price and high quality Pipe Cutting and Chamfering Machine .All of testing instruments manufactured by FYI are well-known throughout China and more than 50 countries abroad for providing superior value and performance

Follows are features of Pipe Cutting and Chamfering Machine

  • Wide application, modular design, high rigidity, pneumatic clamp, planetary cutting method, which make the cutting surface smooth, and easy to be fixed when doing pipe pressure test.
  • It is easy to adjust the cutting depth and the chamfering angle is finished by once, reducing labor and enhancing working efficiency.
  • Motor for revolving the sample starts up after the sample is well-clamped and automatically stop when the sample is out of being well-clamped, which is the protection to the operator;
  • Motor for chamfering the sample starts up after the handle is lifted and automatically stops when the handle is lowered, which is also the protection to operator;
  • Electronic soft start function, providing the required torque when the machine stably starts at low speed.

Application

Pipe Cutting and Chamfering Machine

Pipe Cutting and Chamfering Machine is used for cutting and chamfering big plastic pipes, can be used with plastic pipe extrusion production line. It is suitable for pipe manufacturers, quality inspections and research institutions.

European manufacturing technique, good performance on cutting, high degree of automation, humanized protective device, convenient installation and operation and good appearance;

Pipe Cutting and Chamfering Machine complies with international and retailer standards.

If you need more information about Pipe Cutting and Chamfering Testing Machine. Please contact with us.

Key specification

Key specification of Pipe Cutting and Chamfering Machine 

Cutter feeding method Handle
Pipe diameter Φ75mm~Φ630mm
End face chamfering angle 15°
Air pressure 0.4Mpa~0.7Mpa
Lifting method Pneumatic
Power supply of scrap collector AC380V 50Hz, 3kW, three-phase & five-wir
Dimensions of scrap collector 1210mm×500mm×1070mm
Weight of scrap collector 80kg
Power supply AC380V 50Hz, 4kw, three-phase & five-wire
Dimensions 1680mm×1320mm×1830mm
Weight 600kg

Reviews

There are no reviews yet.

Be the first to review “Pipe Cutting/Chamfering Machine XGQ-630”

Related products

Back To Top