skip to Main Content

Piping System Joints Leak Tightness Tester DWAST

Rated 0 out of 5
(be the first to review)

Piping System Joints Leak Tightness Tester, also named Leak Tightness Tester for Piping System Joint. It is used for the testing of the cooperation performance between the pipes, i.e. PVC, polyethylene, polypropylene and other plastic pipes with flexible sealing ring flexible connection.

Piping System Joints Leak Tightness Tester DWAST

Piping System Joints Leak Tightness Tester is mainly used for the testing of the cooperation performance between the pipes, namely, the detection of the interface sealing problem, when the plastic pipe materials such as polyvinyl chloride, polyethylene and polypropylene are flexibly connected with elastic sealing ring.

We provide reasonable price and high quality Piping System Joints Leak Tightness Tester

Follows are features of Piping System Joints Leak Tightness Tester

  • Industrial color LCD touch screen, 0 to -0.08MPa arbitrary test pressure setting, programmable stage pressure control; It can easily detect the data and provide abundant test time pressure curves and other information.
  • The test data can be stored in a usb flash disk to realize massive data storage. Data storage is in general format, without professional software, and can be checked by general office software.
  • The radial deformation device of the hydraulic pipe material, the digital display head size deformation monitoring, and can automatically adjust the heart, the operator to the thick wall pipe pressure, easy and easy.
  • Different specifications should be equipped with corresponding supporting blocks to make their operation easier and clearer.
  •  The direction of the declination is an arbitrary deviation of the left and right sides.
  •  In order to facilitate the installation of a large sample, the test sample intensifies the structure that the upper cover can open.

Application

Application of Piping System Joints Leak Tightness Tester 

Piping System Joints Leak Tightness Tester is used to check the adaptability between pipes or fittings when plastic pipes of PVC, PE and PP are flexible connected by elastic seal ring.

Inserted in the section of the bearing of the sample, and make the two axis section into a deformation Angle, under the two negative pressure conditions prescribed by the prescribed time, to check whether there is leakage sample test process

Section will be inserted in the section of the bearing of the sample, and make the two axis section into a deformation Angle, under the two negative pressure conditions prescribed by the prescribed time, to check whether there is leakage sample test process, the product is detection unit, the production, scientific research units ideal test equipment.

Piping System Joints Leak Tightness Tester complies with ISO 4422

, ISO 13844,GB/T 10002.1 ,GB/T 10002.2 GB/T 18477.1, GB/T 18477.3

BS EN 1411, BS EN 744 etc international and retailer standards.

If you need more information about Piping System Joints Leak Tightness Testing Machine. Please contact with us.

Standards

Standards of Piping System Joints Leak Tightness Tester 

ISO 4422 ISO 13844 GB/T 10002.1 GB/T 10002.2
GB/T 18477.1 GB/T 18477.3

 

Some standards might not be the full version; to read the full version for free, write an email to [email protected].
Please contact the administrator to get any violations removed.

Key specification

Key specification of Piping System Joints Leak Tightness Tester

No. of working position 1
Applicable pipe range Φ(63~400)mm
Pressure range 0~(-0.08)Mpa
Pressure resolution 0.001Mpa
Pressure accuracy ±0.002Mpa
Max. deflection angle
Power supply AC220V 50Hz, 1.0kW

Reviews

There are no reviews yet.

Be the first to review “Piping System Joints Leak Tightness Tester DWAST”

Your email address will not be published.

You may also like…

Back To Top