skip to Main Content

Pipe Thermostability Chamber XCB

Rated 0 out of 5
(be the first to review)

Pipe Thermostability Chamber, also named Plastic Pipe Thermostability Chamber, Thermal Stability Test Chamber or ISO 1167 Plastic Pipe Thermostability Chamber, it is suitable for hydrostatic test which can supply the correct temperature with correct time to check the length of heating.

Pipe Thermostability Chamber XCB   

Pipe Thermostability Chamber is used to determine the level of internal stresses in pipes. A specified length of pipe is placed at 110℃ for 8760hours, then check the length after heating.

We provide reasonable price and high quality Pipe Thermostability Chamber .All of testing instruments manufactured by FYI are well-known throughout China and more than 50 countries abroad for providing superior value and performance

Follows are features of Pipe Thermostability Chamber

  • Adopt double insulated glass door and built-in illuminator, it is convenient for operation and avoid the accidental burns;
  • Equipped with drainage device, can drain the waste water timely, reduce the burden of the working position;
  • The insulating layer is of 90mm thickness, reduce the experimental cost, increase the stability of the machine.
  • The heater has self-protection function, avoid the accidental damage;
  • Perfect earth leakage protection, the over-temperature protection system protect both the machine and the operator;
  • Special clamp exhaust design, reduce the operator’s labor intensity;
  • The pipe is hung when doing the test, comply with the standard’s requirement.

Application

Pipe Cutting and Chamfering Machine   

Pipe Cutting and Chamfering Machine is determination of test specimen in the regulation of stress conditions, through the 8760 hours after the test. It can be used with Hydrostatic Pressure Tester to do the thermal stability test at hydrostatic state.

Pipe Cutting and Chamfering Machine complies with ISO 1167, 10508, ISO DIN 15874, 15877,GB/T 6111, 18742.2, 18993 ETC international and retailer standards.

If you need more information about Pipe Cutting and Chamfering Testing Machine. Please contact with us.

Standards

Standards of Pipe Cutting and Chamfering Machine  

ISO 1167 ISO 10508 ISO DIN 25874 ISO 15877
GB/T 6111 GB/T 18742.2 GB/T 18993

 

Some standards might not be the full version; to read the full version for free, write an email to [email protected].
Please contact the administrator to get any violations removed.

Key specification

Key specification of Pipe Cutting and Chamfering Machine

Temperature range RT~120℃
Temperature accuracy ±1℃
Temperature error range ±0.5℃
Temperature uniformity ±1℃
Max. pipe diameter Φ63mm
Max. specimen diameter 500mm
Working position 12
Power supply AC220V, 50Hz, 3kw

Reviews

There are no reviews yet.

Be the first to review “Pipe Thermostability Chamber XCB”

Your email address will not be published.

You may also like…

Back To Top