Pneumatic Bursting Strength Tester YG032P
Pneumatic Bursting Strength Tester is used to determine the bursting strength and bursting distension of knitted fabrics, woven and nonwoven fabrics and so on, by the application of pneumatic method.
FYI are best supplier and exporter of Burst Test Machine ,You can contact with directly if you want know bursting strength machine price and bursting strength tester calibration .
Pneumatic Bursting Strength Tester YG032P
YG032P Digital Pneumatic Bursting Strength Tester is used to determine the bursting strength and distension at burst of a variety of materials, including textiles (knitted and woven), nonwovens, paper, plastics, medical products, etc.
Follows are Bursting Strength Tester Specification :
- Touch screen with concise and intuitiveinterface, simple and convenient to use;
- Transparent organic glass cover with blue lamp lighting, the light is soft and bright, easy to observe the test process;
- Non-electric driven supercharging system provides a stable and continuous air source for different bursting pressures;
- Non-contact laser ranging with high accuracymeasurement, sensitive and fast response, the ranging system is stable, durable and reliable;
- The magnetic suction mode makes it quick, simple and convenient to change thetest heads of different test areas;
- The intelligent identification function can remind operators to confirm whetherthe installed test head matches the test area to prevent test failure or serious deviation in test results;
- Pneumatic clamping sample, the force is uniform and no slippage, the operation is safe and convenient;
- Four test methods are available: CRB, CTB, CP, CE;
- Security design: The equipment will stop measuring and display over range pop-up when the bursting pressure or height value over the range;
- With data storage (20 groups, each group of 20 samples), query and print functions;
- Equipped with calibration kit, easy to calibrate the height.
For more information about fabric bursting tester,you can also visit www.fyichina.com.cn
Application
Application of Pneumatic Bursting Strength Tester
Pneumatic Bursting Strength Tester is used for gas-pressure method of all kinds of fabrics, including knit fabric, woven fabric and nonwoven fabric, laminated fabric and other technology manufacturing all kinds of fabric, We can get the burst of expansion degree under the standard condition or wet burst strength
The sample is held on an extendable diaphragm by a round clamp, and the pressure is applied under the diaphragm to expand the diaphragm and sample. The pressure is increased at a constant speed until the sample is broken and the bursting strength and expansion are measured.
Machine meet with ISO 13938-2、ASTM D3786, GB/T 7742.2 etc… If you need more information about Bursting Strength Equipment, please contact with usa.
Standards
Pneumatic Bursting Strength Tester Standard
| ISO 13938-2 | ASTM D3786 | GB/T 7742.2 |
|---|
Some standards might not be the full version; to read the full version for free, write an email to [email protected].
Please contact the administrator to get any violations removed.
Key specification
Key specification of Pneumatic Bursting Strength Tester
| Measuring range | 0.2~900KPa |
|---|---|
| Accuracy | ±0.2%FS |
| Diaphragm thickness | ≤2mm |
| Test areas | Standard: 7.3cm²(Φ30.5mm)
Optional: 10cm²(Φ35.7mm), 50cm²(Φ79.8mm) and 100cm²(Φ112.8mm) |
| Max. distension | 30mm when the test area is 7.3cm2 or 10cm2;
70mm when the test area is 50cm2 or 100cm² |
| Flow rate | (100~500)ml/min |
| Clamping method | Pneumatic clamping |
| Range measure method | Laser ranging |
| Range measure accuracy | ±0.1%FS |
| Test methods |
|
| Data storage | 20 groups, each group of 20 pieces |
| Units | kPa, kg/cm2, bar, lb/in2 |
| Height unit | mm/cm/inch |
| Output method | Display and print output |
| Air source pressure | 0.6~0.8Mpa |
| Power supply | AC 220V, 50Hz |
| Dimensions | 570×480×700mm (L×W×H) |
| Weight | 145kg |
You must be logged in to post a review.
Reviews
There are no reviews yet.