Thermal Cycling Tester DW5380
Thermal Cycling Tester, also named Thermal Recycling Testers, Pipe Thermal Cycling Tester or Hot and Cold Water Cycling Tester. It is suitable for all kinds of plastic pipes and pipe fittings according to the requirements of the standard after assembly testing of pipeline system, within the piping system under a certain pressure, hot and cold temperature variations within the given time, finishing experiments, check leakage, burst pipes and fittings.
Thermal Cycling Tester DW5380
Thermal Cycling Tester consists of sample chamber, cold water tank (with chiller & heat exchanger), hot water tank with heaters and electric control panel. Lockable transparent folding doors make samples installation more easily and allow easy access to all samples from three sides;
We provide reasonable price and high quality Thermal Cycling Tester, All of testing instruments manufactured by FYI are well-known throughout China and more than 50 countries abroad for providing superior value and performance
Follows are features of Thermal Cycling Tester
- Testing control and monitoring of individually station takes over PLC and touch screen terminal. Testing results are easily transferred to MicrosoftExcel for further processing;
- Individual circulation time, flow rate and pressure can be selected;
- It provides the test constancy as regards to temperature, pressure and flow rate as well as lowering the energy consumption;
- Several reliable safeguard, e.g. liquid level measuring devices, emergency stop switch and cord switch ensure the tester to be out of action in time if the test fails or piping system bursts. Doors shall be locked during testing period;
- High quality multilevel centrifugal pumps are used to provide pressure in sample stirrings. Automatic water filling design ensures full tank capacity during the whole time;
- Circulating pump to ensure uniform temperature;
- Variable-frequency speed controller to stabilizethe pressure;
- Pressure transducer to supply the acquisition signal of pressure;
- Thermal-insulation cold/hot stainless steel water tank to supply cold/hot water for testing;
- Stainless steel temperature sensor to acquire temperature signals of water tank and water inlet/outlet;
Application
Application of Thermal Cycling Test
Thermal Cycling Test is mainly used to determine the leakage status of composite pipes & fittings when subjected to specified cycles of temperature alternation (alternation of cold water and warm water) under specified internal pressure load. It consists of sample chamber, cold water tank (with chiller & heat exchanger), hot water tank with heaters and electric control panel.
Thermal Cycling Test complies with ISO 10508, EN 12293 etc international and retailer standards.
If you need more information about Thermal Cycling Test Machine. Please contact with us.
Standards
Standards of Thermal Cycling Test
| ISO 10508 | EN 12293 |
|---|
Some standards might not be the full version; to read the full version for free, write an email to [email protected].
Please contact the administrator to get any violations removed.
Key specification
Key specification of Thermal Cycling Test
| Pressure range | 4.00bar～12.00bar (0.400Mpa～1.200Mpa) |
|---|---|
| Pressure controlling accuracy | ±0.05Mpa |
| Test positions | 6 |
| Max. external diameter of sample pipe | Φ63mm |
| Alternation time between hot and cold water | No more than 1min |
| Cycle period | 300s～1200s |
| Number of cycles | 1～100000,selectable |
| Temperature range of cold water | 20oC to RT(room temperature),settable |
| Temperature range of hot water | RT to 95oC,settable |
| Temperature controlling accuracy of cold water | ±2oC |
| Temperature controlling accuracy of hot water | ±1oC |
| Temperature display error | 1oC |
| Power supply | AC380V 50Hz, 25kW |
| Overall dimensions | 4500×3000×2000mm(L×W×H) |
You must be logged in to post a review.
Reviews
There are no reviews yet.