DIN 53516 ISO 4649 DIN Abrasion Tester DW5440
iso 4649 DIN Abrasion Tester, also called DIN Rubber Abrasion Resistance Tester, DIN Abrader or Rotary Drum Abrader, is used to determine the abrasion resistance of polyester soles, shoe soles and polymer sheet material.FYI is a leading manufacturer and supplier of high quality DIN abrasion tester. We offer cost effective testing solutions and equipments for various industrial applications.
ISO 4649 DIN Abrasion Tester DW5440
DW5440 DIN Abrasion Tester is applicable to flexible materials, rubber, tires, conveyor system, transmission belts, sole, leather and so on. There is adequate test area, operation and sampling are simple. It should be used together with a balance. It mainly consists of power system, rotary cylinder, sample holder, automatic stop system and rack and small driving gear for driving the sample, seat and dust collector.
The major working principle is that under some specific load and on sand cloth of a specific grade, the column-shaped sample is placed on the sand cloth for abrasion for a specific journey. In this way, the mass of the abrasion from the sample can be measured by using the balance. With this and the density of the sample, the abrasion volume can be calculated.
This machine complies with these standards：ISO 4649, 20344, 20345, 20871, ASTM D5963, DIN 53516.
The following are features of DIN abrasion tester:
- LCD display with blue backlight;
- Settable test cycles;
- Easy to operate.
Application
Application of DIN abrasion tester
DIN abrasion tester is suitable for the abrasion resistance test of polyester soles, shoe soles and polymer sheet materials. When the abrasion wheel rotates, the sample wears on the abrasive sheet of certain abrasive grade to evaluate its wear performance. The tester features good reproducibility and easy operation.
During the test, the sample and the grinding wheel are subjected to a certain Angle of tilt and a certain load, and the abrasion of the sample is measured in a certain range.
△V = (W1- W2) x 200 / (Q (S)
W1: pre-grinding weight (mg)
W2: grinding weight (mg)
The abrasion of the emery cloth should be between 200 ±20mg. If it is too sharp, please rough it with coarse grinding and correct it. When the abrasion is insufficient, please change the sand cloth so as not to affect the accuracy of the test.
If you need more information about DIN abrasion tester, please contact us.
Standards
Standards of DIN abrasion tester
| ASTM D5963 | DIN 53516 | ISO 4649, 20344, 20345, 20871 |
|---|
Some standards might not be the full version; to read the full version for free, write an email to [email protected].
Please contact the administrator to get any violations removed.
Key specification
Key specification of DIN abrasion tester
| Diameter of cylinder | φ150mm |
|---|---|
| Rotating speed of cylinder | (40±1)rpm |
| Lateral displacement of sample holder | (4.20±0.04)mm per revolution of the cylinder |
| Test method | Non-rotating, Rotating |
| Load | 2.5N, 5N, 10N |
| Power supply | AC220V, 50Hz |
| Dimensions | 850*330*400mm (L*W*H) |
| Net Weight | 80kg |
1 review for DIN 53516 ISO 4649 DIN Abrasion Tester DW5440
You must be logged in to post a review.
Victor –
Works well, no extra noise, instructions I should read someday, the instrument prompts you through the whole testing process