skip to Main Content

NBS Abrasion Tester DW9650

Rated 0 out of 5
(be the first to review)

NBS Abrasion Tester, also called NBS Rubber Abrasion Tester or Electronic NBS Abrasion Tester with digital LCD display, is an indispensable instrument used for determining the abrasion resistance of vulcanized rubber. OuNBS Abrasion Tester is abrade 2.5mm thickness of the test specimens and the standard reference compounds against rotating abrasive papers under specified contact pressure and area.

NBS Abrasion Tester DW9650

FYI is a leading manufacturer and supplier of high quality NBS abrasion tester.  It is widely applicable to the physical test of abrasion resistance of rubber products with abrasion resistance as the main performance of rubber tires, tank tracks and soles and to assist the industry in controlling the quality of products;

We provide reasonable price and high quality NBS abrasion tester. All the testing instruments manufactured by FYI factory are well-known throughout China and more than 50 countries abroad for providing superior value and performance. We can customized the machine according customer’s enquiry .

NBS abrasion tester is suitable to determine the abrasion resistance of rubber products and sole materials. The abrasion resistance is determined by calculating the percentage of numbers of revolutions required to abrade 2.5mm thickness of the test specimens and the standard reference compounds against rotating abrasive papers under specified contact pressure and area, where NBS abrasion differs from DIN and AKRON abrasion.

Follows are features of NBS abrasion tester:

  • Counter with 6-bit electronic LCD display;
  • Equipped with dust collector to remove particles during the test;
  • Worm reducer driving;
  • With protective equipment: short circuit protection, automatic stop, motor control device and support device for fine-tuning nut.

 

Application

Application of NBS abrasion tester

NBS Abrasion Tester is widely used to determine the abrasion resistance of numerous rubber products with wear-resisting as their main performance, such as rubber tire and shoe sole, can assist industries with product quality control. It’s not recommended for materials less than 2.5mm in thickness.

NBS abrasion testing machine test method will test piece on the test machine, add a certain load weight, to rotate the sandpaper friction test piece, check its wear and tear. It is no need balance . This will be different with AKRON Abrasion Tester.

NBS abrasion tester complies with ASTM D1630.

If you need more information about NBS abrasion tester, please contact us.

Standards

Standards of NBS abrasion tester

ASTMD 1630

Key specification

Key specification of NBS abrasion tester

Number of working stations 3
Specimen size 25.4×25.4×6.35mm
Load 2,265g(5LB)×3pcs
Counter LCD, 0~999,999
Drum diameter φ150mm
Rotating speed (45±5)rpm
Thickness gauge Dial gauge
Suction of dust collector 2kg/cm2
Abrasive paper 40# (Made in USA)
Power supply AC 220V, 50Hz
Dimensions 550×300×500mm(L×W×H)
Weight 70kg

Reviews

There are no reviews yet.

Be the first to review “NBS Abrasion Tester DW9650”
Back To Top