Gloves Cut Resistance Tester FY012J
Gloves Cut Resistance Tester, also named EN388 Protective Clothing Cut-resistance Testing Machine, which is used to determine the cut-resistance property of materials from protective gloves.
Specimens are cut by a counter-rotating circular blade, which moves with an alternating motion under a specified load.
Gloves Cut Resistance Tester FY012J
FY012J Glove Cut Resistance Tester is used to determine the blade cut resistance property of materials from protective gloves, but not suitable for very hard materials. Specimens are cut by a rotating round blade, which moves with a reciprocating motion under a specified load.
Glove Cut Resistance Tester complies with EN 388: 2003, ISO 20344: 2011, GB/T 20991-2007.
Follows are Gloves Cut Resistance Tester Specification :
- Touch screen display;
- Equipped with dust cover;
- Auto stop at the end of testing;
- It has power off memory function.
Application
Application of Gloves Cut Resistance Tester
Gloves Cut Resistance Tester is specially designed to test the strength of protective gloves and upper protection areas. The anti-cutting performance of gloves or upper shoes was determined by cutting samples with a circular cutter rotating counterclockwise under specified load.
If you need more information about EN388 Protective Clothing Cut-resistance Testing Machine, please contact with us.
Standards
Gloves Cut Resistance Tester standards
| Protective gloves | EN 388: 2003 |
|---|---|
| Upper (of a shoe) | ISO 20344: 2011, GB/T 20991-2007 |
Please contact the administrator to get any violations removed.
Key specification
Key specification of Gloves Cut Resistance Tester
| Loading pressure | 5N±0.05N |
|---|---|
| Stroke | 50mm |
| Max. cutting speed | Less than 10cm/s |
| Control mode | PLC & touch screen display |
| Power supply | AC220V, 50Hz |
| Dimensions | 700×400×550mm (L×W×H) |
| Net weight | 75kg |
1 review for Gloves Cut Resistance Tester FY012J
You must be logged in to post a review.
Jenny –
Conscientious seller. I recommend to all.