Water Hammer Tester DW5012
Water Hammer Tester, also named water hammer in pipes which is designed for checking the resistance ability of plastic pipes, fittings or piping system to the stress fatigue or to cyclic peak pressure on the condition of alternative loads.
Water Hammer Tester DW5012
Pipe water Hammer Tester is applicable to thermoplastics pipes, fittings and piping system for hot and cold water systems, such as, PP-R, PP-H, PE, PEX pipes and fittings.
Follows are water Hammer Tester features :
- It’s controlled by microcomputer and displayed with LED;
- The system is easy and reliable to operate with the function of auto alarm.
Application
Application of Water Hammer Tester
Water pipe pressure tester is suit for all kinds of pipe and pipe fittings according to the requirements of the assembly, under specified temperature under pressure shock, after fulfilling the specified number of alternate, monitor the leakage of the pipe and pipe fittings, suitable for pipes, fittings or the combination of the pipe and fitting pressure impact test. The pressure source is provided by the imported frequency conversion pump. In terms of safety, the reliable safety protection device not only effectively protects the test personnel, but also facilitates them to observe the test conditions.
If you need more information about Water pipe pressure tester Please contact with us.
Standards
Water Hammer Tester standards
| ISO 10508 | ISO 15875 | ASTM F1281 | ASTM F1282 |
|---|
Some standards might not be the full version; to read the full version for free, write an email to [email protected].
Please contact the administrator to get any violations removed.
Key specification
Key specification of Water Hammer Tester
| Pressure frequency | (30±5) cycles/min |
|---|---|
| Test pressure | (0.05~1.5)Mpa |
| Cycling times | ≤10000, randomly settable |
| Number of positions | 6 |
| Alternate time between high & low pressure | ≤1s |
| Max. diameter of pipe | Φ63mm |
| Power supply | AC380V 50Hz, 4kW, three-phase, five-wire |
| Dimensions of control cabinet | 700×600×1440mm (L×W×H) |
| Dimensions of test chamber | 1450×900×1230mm (L×W×H) |
You must be logged in to post a review.
Reviews
There are no reviews yet.