skip to Main Content

Lab Circular Knitting Machine with touch screen and mutli-Head DW0910S3

Rated 0 out of 5
(be the first to review)

The DW0910S3 Lab Circular Knitting Machine with Touch Screen and Multi-Head is designed to knit single yarns into cylindrical knitted textiles. It is also used to determine the dyeing uniformity of polyester filament yarns (a method for dyeing socks). Its speed ranges from 10 to 250 rpm, and the number of needles is determined by the linear density of the yarn. Please provide the yarn linear density before ordering.

Category:

Lab Circular Knitting Machine with touch screen and mutli-Head DW0910S3 

DW0910S3 Lab Circular Knitting Machine with touch screen and Multi-Head is used to knit single yarns into cylindrical knitted fabrics. It is also used to test the dyeing uniformity of polyester filament yarns (dyeing method for knitting socks). Its speed can be adjusted from 10-250rpm, the number of needles is chosen according to the linear density of yarn. So please offer the yarn linear density before ordering.

The Lab Circular Knitting Machine storage feeder : It equipped with a micro motor inside, and the motor drives the yarn storage cylinder to rotate and wind the yarn; A certain amount of yarn layer is always maintained on the yarn storage cylinder, so as to ensure the consistent yarn unwinding conditions, uniform yarn tension and stable yarn delivery.

The storage feeder working principle: It is composed of a storage cylinder, a micro motor, the storage cylinder is driven by a micro motor to rotate and wind the yarn layer, the motor is controlled by a inclined ring on the storage cylinder. When the yarn layer is reduced, the inclined ring drops, the switch is connected, and the motor drives the yarn storage cylinder to rotate and wind the yarn; When the yarn reaches a certain amount, the inclined ring is lifted, the switch is disconnected, and the yarn storage cylinder stops rotating, so that a certain amount of yarn layer is always maintained on the yarn storage cylinder, so as to ensure the consistent yarn unwinding conditions, uniform yarn tension and stable yarn delivery.

The circular knitting machine is suitable for laboratories. Please confirm the detailed needle when you give us order . The specific needle density depends on the yarn count.

FEATURE of Lab Circular Knitting Machine :

  • Active yarn storage feeder achieves active feeding;
  • Rotation speed of cylinder is settable;
  • The first hot box (deformation hot box) and the second hot box (shaping hot box) adopt a combined gas-phase heating, computer-controlled heating and temperature control, with a temperature control accuracy of ± 1 ° C, ensuring the consistency of temperature for each ingot and promoting the uniformity of dyeing
  • 2The machine has a simple structure, reliable transmission, low Adjustable fabric length;
  • The machine has a simple structure, reliable transmission, low noise, and is easy to adjust the process.
  • Number of needles should be chosen according to the yarn count. Below is the reference table.
  • With touch screen.
  • With multi-Head.

Application

Application of Small Fabric knitting Machine

Small Fabric knitting Machine is for the production of tubular knitted fabric for checking dyeing uniformity and evaluate dye affinity .It Equipped with one cylinder 3,1/2” diameter

Yarn Count (dtex) Number of Needles for Choice (N)
16.5~33 320
22~76 300
33~111 280
40~100 260
111~220 220 or 240
220~440 176 or 200
400~660 160
660~1000 120 or 140
Over 1000 96

The Reference Table for Choosing Number of Needles

If you need more information about Lab Knitter for yarn. please contact us.

Standards

Small Fabric knitting Machine standards

Key specification

Key specification of Small Fabric knitting Machine

Needle gauge 24 G (can be customized)
Applicable chemical fiber POY( DW0910S1)
POY, DTY, FDY( DW0901S2)
POY, DTY, FDY( DW0910S3)
Diameter of cylinder 3.5 inch
Rotation speed of cylinder 10~300rpm, settable
Number of needles 120~320N
(Please inform the yarn count before placing order)
Power supply AC 220V 50Hz
Gross weight 171kg
Package dimensions (L*W*H) 98*70*134cm

Reviews

There are no reviews yet.

Be the first to review “Lab Circular Knitting Machine with touch screen and mutli-Head DW0910S3”

You may also like…

Back To Top