Martindale Tester YG401D
Martindale Tester, also named Textile Martindale Abrasion Tester, it is used to assess abrasion resistance of woven fabrics.
Martindale Abrasion and Pilling Tester YG401D Description
Martindale Abrasion tester was designed to give a controlled amount of multi-directional abrasion, between the fabric surface and a crossbred wool abrading fabric, at comparatively low pressure until thread breakdown, . It is not applicable to fabrics having a long pile or surface coating.
FYI is a leading supplier and export of Martindale Tester and supply best solution for fabric testing .
Martindale Abrasion and Pilling Tester is refers to the martindale method based on standard and its relationship to test the textile products.
Related standards is as belows: GB/T 21196.1, GB/T 19089,ISO 12947-1, ISO 5470-2, ISO 17704,ASTM D4966, BS 3424-24 (Method 27A),EN 388, IWS TM 112, JIS L1096,BS 5690 (Superseded by BS EN ISO 12947-1),SATRA TM31 (Method A, B),GB/T 4802.2, ISO 12945-2,ASTM D4970, IWS TM 196.
This instrument has two kinds of Lissa-jous movement track, which are used for determining properties of abrasion resistance and pilling separately.
- Adopts microcomputer of touch screen control system;
- With memory function when power interrupted, andcan save the data when power interrupted;
- Sport guide plate is made of aluminum alloy, beautiful and endurable;
- Rail is made of stainless steel, easy to unload and without mechanical failure;
- Multi-working position, satisfies 4, 6, 8 or 9 specimens to be tested at the same time;
- Stainless steel load piece, artistry and durable;
- Two counting methods, counting up and counting down.
APPLICATION
Application of Martindale Abrasion and Pilling Tester
Martindale Abrasion and Pilling Tester is applied to determine the pilling and abrasion resistance properties of most of textile (including woven fabric, knitting, nonwoven fabric, ramie, silk etc.) with bearing slight press. The relative movement track of specimen and abrasion is Lissa-jous figure. Circular fabric sample under certain pressure with standard abrasive according to Li Sha as (Lissajous) and track curve of friction .This will cause the sample damaged. The wear resistance of the sample is think as the abrasion resistance of the fabric .
If you need more information about Martindale Abrasion and Pilling Machine. Please contact with us
Standard
Martindale Abrasion and Pilling Tester Standard
| Abrasion | GB/T 21196.1, GB/T 19089,
ISO 12947-1, ISO 5470-2, ISO 17704, ASTM D4966, BS 3424-24 (Method 27A), EN 388, IWS TM 112, JIS L1096, BS 5690 (Superseded by BS EN ISO 12947-1), SATRA TM31 (Method A, B) |
|---|---|
| Pilling | GB/T 4802.2, ISO 12945-2,
ASTM D4970, IWS TM 196 |
Some standards might not be the full version; to read the full version for free, write an email to [email protected].
Please contact the administrator to get any violations removed.
Key specification
Key specification of Martindale Abrasion and Pilling Tester
| Number of Working Position | 6 |
|---|---|
| Display | Color touch screen |
| Presetting Number | 0~99999 times |
| Pressure Weight(abrasion) | 9kPa, 12kPa |
| Pressure Weight (pilling) | (415±2)g |
| Effective diameter of Abrading head | φ28.65mm for abrasion test
φ90mm for pilling test |
| Abrading Device Speed | 20~70r/min, adjustable |
| Pressing weight | (2.5±0.5)kg |
| Power Supply | AC220V, 50Hz |
You must be logged in to post a review.
Reviews
There are no reviews yet.