skip to Main Content

astm d1238 Melt Flow Testers DW5450A

Rated 0 out of 5
(be the first to review)

Melt Flow Tester, also named Melt flow indexer, MFR index tester or Melt flow index tester. In plastic processing, melt flow rate is an important index to measure the fluidity of plastic melt. The structural factors of the polymer can be studied by measuring the flow rate of plastics.

astm d1238 Melt Flow Tester DW5450A

FYI- best Melt Flow Tester Supplier of china with affordable price.

Melt Flow testing equipment is MFR Flow index tester to mainly used to test the melt flow rate of various high polymers in the viscous flow state, which is suitable for the polycarbonate, polyaromatic sulfone, fluorine and so on.

DW5450A Melt Flow Index Tester is used to determine the melt flow rate of thermoplastic materials, such as engineering plastics of high melting temperature including polycarbonate, nylon, fluoroplastic and other plastics of low melting temperature including polyethylene, polypropylene, polystyrene acetal resins and ABS under specified conditions of temperature and load. They are widely applicable to petrochemical, plastic material, plastic manufacturing, plastic product and other industries and related inspection departments, scientific and research institutes and academies.

Melt Flow Indexer complies with ISO 1133-1, ASTM D1238 (Procedure A), GB/T 3682.1 etc international and retailer standards.

All of testing instruments manufactured by FYI are well-known throughout China and more than 50 countries abroad for providing superior value and performance

Follows are features of Melt Flow Testers

  • Automatically control temperature and cut materials;
  • The temperature can rise up rapidly and be kept stably;
  • DW5450A: LCD display.

Application

Application of Melt Flow Testers

Melt Flow Testers is used for measure melt flow rate when the viscous flow state MFR value, it applies to the polycarbonate, higher temperature of aromatic sulfone, fluorine plastic, nylon and other engineering plastics, can also be applied to polyethylene (PE), polystyrene (PS), polypropylene (PP), ABS resin, polyformaldehyde (POM), polycarbonate (PC) resin with lower melting temperature,

They are widely applicable to petrochemical, plastic material, plastic manufacturing, plastic product and other industries and related inspection departments, scientific and research institutes and academies.

If you need more information about Drop Weight Impact Testing Machine. Please contact with us.

Standards

Standards of Melt Flow Indexer

ISO 1133-1 ASTM D1238(Procedure A) GB/T 3682.1

 

Some standards might not be the full version; to read the full version for free, write an email to [email protected].
Please contact the administrator to get any violations removed.

Key specification

Key specification of Melt Flow Testers 

Measuring range 0.1~100g/10min (MFR)
Temperature control 50~400oC
Temperature accuracy ±0.5oC
Display resolution 0.1℃
Time accuracy 0.01s
Cut mode Automatically
Die diameter: 2.095mm
Power supply AC220V 50Hz

Reviews

There are no reviews yet.

Be the first to review “astm d1238 Melt Flow Testers DW5450A”

Your email address will not be published.

You may also like…

Back To Top