skip to Main Content

Semi-automatic Rapier Sample Loom DW298

Rated 0 out of 5
(be the first to review)

Semi-automatic Sample Loom is used for sample weaving of all kinds of fabrics, such as cotton, hair, jute, silk, chemical fiber, blending, etc. It consists of shedding mechanism, weft insertion mechanism, beating-up mechanism, take-up mechanism, let-off mechanism, weft selection mechanism, electrical control mechanism, etc. It is widely used in weaving mills, scientific research units, textile institutes and foreign trade companies, etc.

Category:

Rapier Sample Loom DW298

Rapier Sample Loom is a new type sample loom in our Fast & Accurate Fabric Sampling System for teaching and researching.

Follows are features of  Semi-automatic Rapier Sample Loom:

  • Integrally welded by seamless rectangular steel pipe, reasonable construction and good rigidity;
  • Outer surface treated by baking varnish, good brightness and nice appearance;
  • Adopting pneumatic shedding mechanism to avoid the disadvantage of easy to wear for traditional peg mechanical structure;
  • Stable operation, low noise and high reliability;
  • PLC control touch screen, storing 6pcs of pattern cards and 1000 lines reachable for each pattern card;
  • With computer interface to achieve the communication between PC and PLC.

Application

Application of Rapier Sample Loom

Semi-automatic Sample Loom is used for sample weaving of all kinds of fabrics, such as cotton, hair, jute, silk, chemical fiber, blending, etc. It consists of shedding mechanism, weft insertion mechanism, beating-up mechanism, take-up mechanism, let-off mechanism, weft selection mechanism, electrical control mechanism, etc.

If it is not in initial status, please don’t make such actions as yarn connecting and reeding etc, if necessary, it should be back to initial status to avoid danger;

Proper fire-extinguishing equipment should be equipped in application site of this equipment; Operator should prepare ear plug if he operates this equipment for long time to avoid damage of hearing ability;

When loom is to be stopped, please operate it strictly according to stop procedure, i.e. exit weaving procedure firstly, then close computer;

When variety is changed in loom, please put the working status to preparation stroke during looming;

Standards

Rapier Sample Loom standards

Key specification

Key specification of Rapier Sample Loom

Reed width 20
Color selection Manual
Number of heald frame 16( 20 or 24 optional )
Take-up Manual
Beat-up Manual
Shedding PLC control, Pneumatic
Air source pressure 0.45-0.8 Mpa
Air consumption 200L/min(max)
Power supply AC220 50HZ
Dimensions 1300*980*1510mm

FAQs

FAQs

Q:

We are using a Semi-automatic sample weaving machine supplied with only one fine count 

reed. Is it possible to get different count reeds from your company? 

A: yes, it is possible. please inform us your phone number, then we will ask our agent to contact you as soon as possible.

Reviews

There are no reviews yet.

Be the first to review “Semi-automatic Rapier Sample Loom DW298”

You may also like…

Back To Top