skip to Main Content

Full Notch Creep Tester FNCT-2026

Rated 0 out of 5
(be the first to review)

Full Notch Creep Tester is used to determine the stress cracking resistance of polyethyelene materials in any environment. It is also applicable to the test of drawing performance of pipe materials.

Full Notch Creep Tester FNCT-2026

Full Notch Creep Tester is mainly used to test the fracture time of polymer materials, especially polyethylene and other materials in a certain temperature or solution under static tension.

A test specimen in the form of a square-section bar with coplanar notches in each face at the center, is subjected to a static tensile load in a temperature-controlled environment, for example, air, water, surfactant solution. The geometry of the specimen is such that plane strain conditions are obtained and brittle failure occurs under appropriate tensile load and temperature conditions. The time for this brittle failure to occur after loading is recorded.

Follows are features of Full Notch Creep Tester

  • 6 individual controller, one for each station;
  • Individual test bath for each station, temperature and force can be set individually;
  • High accuracy of the regulation of force and elongation;
  • Automatic diagnosis and with protective function;
  • Stainless steel thermal bath;

Application

Application of Full Notch Creep Tester

Full Notch Creep Tester is available in different configurations the creep tester utilizes load cells to apply and hold the load .

PC control software in both Chinese and English, and can realize the test data storage, archiving, automatic calculation of failure time under a given pressure, and can draw displacement time, force value – time, stress and time curve .

Full Notch Creep Tester complies with ISO 16770 , ISO 899 (optional) , ISO 3501 (etc international and retailer standards.

If you need more information about Full Notch Creep Tester FNCT  Please contact with us.

Standards

Full Notch Creep Tester standards

ISO 16770 ISO 899 (optional) ISO 3501 (optional)

 

Some standards might not be the full version; to read the full version for free, write an email to [email protected].
Please contact the administrator to get any violations removed.

Key specification

Key specification of Full Notch Creep Tester

Number of stations 6
Force application Brushless servomotors, one for each position
Force range 1000N, 2000N, 5000N (Please choose one load )
Force resolution 0.1N
Force accuracy ±1%
Max. tensile travel 200mm
Extension accuracy ±1mm
Time range Up to 10000h
Time resolution 1s
Time accuracy ±1mm
Temperature range RT~95oC (with cooling system)
50oC ~95oC (without cooling system)
Temperature resolution 0.1oC
Temperature accuracy ±1oC
Power supply AC380V 50Hz 15kW
Dimensions 1620×730×1750mm (W×D×H)

Reviews

There are no reviews yet.

Be the first to review “Full Notch Creep Tester FNCT-2026”

You may also like…

Back To Top