Shore Hardness Tester LX/HS Serials
Shore Hardness Tester,also named Shore durometer which is used to determine Shore hardness of plastics ,rubbers and other materials.
Shore Hardness Tester LX/HS Serials
Durometer is used to make the impact pin fall from a certain height to the surface of the material under test. The plunger pin is a small cone with a tip, often tipped with a diamond. Hardness is indicated by the measured height of the pin bounce. Shore hardness tester is used to determine the shore hardness of ferrous and nonferrous metals.
Follows are Shore Hardness Tester Specification :
- Shore hardness shows by pointer/digit, convenient to read hardness value;
- Handheld design, easy to carry, can be hand-held or installed on the support frame.
For more information,you can visit www.fyichina.com.cn
Application
Application of Shore Hardness Tester
It Used to determine the hardness of rubber, plastics, metal materials, etc. In the rubber, plastics industry is often called Shore Hardness Tester.
The parameters used to measure rubber and plastics are called shore hardness.
Standards
Shore Hardness Tester standards
Key specification
Key specification of Shore Hardness Tester
| Type | HS-A: Digital LX-A: Dial HS-C: Digital LX-C: Dial HS-D: Digital LX-D: Dial |
|---|---|
| Applicable materials | HS-A,LX-A: Plastic, leather, rubber, wax, etc. HS-C,LX-C: Foam, sponge, micro-porous materials, etc HS-D ,LX-D: hard rubber, hard resin, glass, thermoplastic, etc. |
| Measuring range | HS-A,LX-A: 0~100HA HS-C,LX-C: 0~100HC HS-D,LX-D : 0~100HD |
| Measuring range (recommended) | HS-A,LX-A: 10~90HA HS-C,LX-C: 10~90HC HS-D,LX-D: 20~90HD |
| Travel of indenter | 2.5mm for all |
| Indenter head size | HS-A,LX-A: Ф0.79mm HS-C,LX-C: SR2.5mm HS-D ,LX-D: SR0.1mm |
You must be logged in to post a review.
Reviews
There are no reviews yet.