skip to Main Content

Foam Ball Rebound Tester DW5422

Rated 0 out of 5
(be the first to review)

Foam Ball Rebound Tester, is also known as ball rebound tester. It is used for determining the resilience by ball rebound of flexible cellular polymeric materials. A steel ball with certain diameter and mass is dropped on a foam specimen from a specified height and the height of rebound is measured. The ratio of the ball rebound height to the drop height in percent can be calculated and displayed automatically.

ASTM D3574-17 Foam Ball Rebound Tester DW5422

FYI- best Foam Ball Rebound Tester Supplier of china with affordable price.

DW5422 Foam Ball Rebound Tester is used for determining the resilience by ball rebound of flexible cellular polymeric materials. A steel ball with certain diameter and mass is dropped on a foam specimen from a specified height and the height of rebound is measured. The ratio of the ball rebound height to the drop height in percent can be calculated and displayed automatically.

We provide reasonable price and high quality Foam Ball Rebound Tester.

All of testing instruments manufactured by FYI are well-known throughout China and more than 50 countries abroad for providing superior value and performance.

Follows are features of Foam Ball Rebound Tester:

  • Touch screen control, large screen display;
  • Industrial PLC control, strong anti-jamming performance, fast data transmission;
  • The instrument can meet the test requirement of different standards;
  • Built-in printer can print test report.

Application

Application of Foam Ball Rebound Tester

Foam Ball Rebound Tester is a testing device specifically for the resilience of materials such as foam ,polyurethane and other materials.

Foam Ball Rebound Tester complies with ISO 8370:2007, ASTM D3574-17, GB/T 6670-2008 etc international and retailer standards.

If you need more information about Foam Ball Rebound Tester. Please contact with us.

Standards

Standards of Foam Ball Rebound Tester

ISO 8370:2007 ASTM D3574-17 GB/T 6670-2008

Note: this tester can conform to but not limit to the standards above, for more standards conformance, please contact us.

Some standards might not be the full version; to read the full version for free, write an email to [email protected].
Please contact the administrator to get any violations removed.

Key specification

Key specification of Foam Ball Rebound Tester  

Inside diameter of vertical transparent tube ISO: Ф30~65mm; ASTM: Ф(40±4)mm
Steel ball diameter ISO: (16±0.5)mm; ASTM: (16.0±0.2)mm
Steel ball mass ISO: (16.8±1.5)g; ASTM: (16.3±0.2)g
Height of drop ISO&ASTM: (500±0.5)mm

GB: (500±0.5)mm and (460±0.5)mm

Control mode PLC + Touch screen
Power supply AC220V, 50Hz
Dimensions 650×330×920mm (L×W×H)
Weight 45kg

Reviews

There are no reviews yet.

Be the first to review “Foam Ball Rebound Tester DW5422”

You may also like…

Back To Top