skip to Main Content

Shoe water penetration tester DW9510

Rated 0 out of 5
(be the first to review)

Shoe water penetration tester is used to test water proof performance of rubber face and shoes lining of rubber shoes. The pneumatic clamps seal the specimen and to clamp the specimen into the water, while certain air pressure filled into the samples, if the sample seepage, it will immediately generate bubbles.

Shoe water penetration tester DW9510

DW9510 Shoe water penetration tester is used to test waterproof performance of rubber face and shoes lining of rubber shoes. The pneumatic clamps seal the specimen and to clamp the specimen into the water, while certain air pressure filled into the samples, if the sample seepage, it will immediately generate bubbles. When reach the set time, the clamp with the sample automatically lift out of the water.

The machine complies with these standards: ISO 8782, EN ISO 20344.

Follows are features of shoe penetration tester:

  • Pneumatic clamps and two manual handles to control them, one for each;
  • Automatic descending and rising of clamps;
  • Adjustable test pressure and settable time for holding the test pressure;
  • Automatically blow air into shoe and hold the test pressure for a set time;
  • Water pump to supply water into test tank;

For more information, you can also visit www.fyichina.com.cn

Application

Application of Shoe water penetration tester

DW9510 Shoe water penetration tester is used to test waterproof performance of rubber face and shoes lining of rubber shoes. The pneumatic clamps seal the specimen and to clamp the specimen into the water, while certain air pressure filled into the samples, if the sample seepage, it will immediately generate bubbles. When reach the set time, the clamp with the sample automatically lift out of the water.

If you need more information about Shoe  Water Penetration Tester, please contact us.

Standards

Shoe  Water Penetration Tester Standards

STANDARDS EN ISO 20344 ISO 8782

Note: this shoes water penetration tester can conform to but not limit to all the standards above, for more standards conformance, please contact us.

Some standards might not be the full version; to read the full version for free, write an email to [email protected].
Please contact the administrator to get any violations removed.

Key specification

Key specification of shoes water penetration tester

  • Number of working position                 2
  • Range of air pressure                              0~50kPa (adjustable)
  • Timer range                                               0~99h59min59s
  • Power supply                                            AC220V 50Hz
  • Dimension                                                 1100×620×1650mm(L×W×H)
  • Weight                                                        128kg

Reviews

There are no reviews yet.

Be the first to review “Shoe water penetration tester DW9510”

You may also like…

Back To Top