skip to Main Content
Everything You Need To Know About Color Fastness To Washing

Everything You Need to Know About Color Fastness to Washing

The color fastness of textiles to washing refers to the fabric’s capacity to retain its original color under washing circumstances, that is, the ability to not fade or change color.

Almost all textiles are washed in people’s everyday lives. The fabrics are cleaned in a washing liquid at a certain temperature. The dye will come off the textile due to the action of the washing liquid, and ultimately the original color of the textile will alter, which is known as discolouration. At the same time, the dye in the washing liquid will contaminate and modify the color of other fabrics, a process known as staining.

Whether or not the color fastness to washing is excellent or bad, it will effect the staining of other garments worn on the body, or it will stain other clothes when washed with other clothes.      

The standard of washing fastness

Color fastness to washing is one of the common test items for textile color fastness. It mainly tests the color fastness of textiles used in clothing and home textiles after simulating one or more household and commercial launderings. Common test standards are ISO 105 C06 and AATCC 61:2010.

ISO 105 C06

ISO 105 C06 contains a total of 16 different test procedures from A1S to E2S.

Wherein, “S” refers to single commercial or domestic laundering. “M” means multiple washes, or about five home or commercial washes. Their specific test conditions are as follows.

Test numberTemperature ℃Liquor volume mlAvailable chlorine %Sodium perborate g/lTime minNumber of steel ballsAdjust pH to
A1S40150NoneNone3010aNot adjusted
A1M40150NoneNone4510Not adjusted
A2S40150None13010aNot adjusted
B1S50150NoneNone3025aNot adjusted
B1M50150NoneNone4550Not adjusted
B2S50150None13025aNot adjusted
C1S6050NoneNone302510,5±0,1
C1M6050NoneNone455010,5±0,1
C2S6050None1302510,5±0,1
D1S7050NoneNone302510,5±0,1
D1M7050NoneNone4510010,5±0,1
D2S7050None1302510,5±0,1
D3S70500,015None302510,5±0,1
D3M70500,015None4510010,5±0,1
E1S9550NoneNone302510,5±0,1
E2S9550None1302510,5±0,1

a For dlicat fabics and aricles of wool or sik or blends containing these fibres, steel balls are not used in the test. Record the use of steel balls in the test report [see 7 g)]:

AATCC 61:2013

AATCC 61:2013 includes five test methods, however the most commonly used are 1A and 2A. 1A is appropriate for hand washing at 40°C and 2A is appropriate for machine washing at 49°C.

The 3A program, which is less often used, tests clothes at 71°C, whereas 4A and 5A add the chlorine-based bleach sodium hypochlorite to the wash water. The following are the test conditions.

Test No. b℃(±2℃)℉(±2℉)Total Liquor Volume (mL)Percent Powder Detergent of Total VolumePercent Liquid Detergent of Total VolumePercent Available Chlorine of Total VolumeN0. of Steel  BallsNo. of Rubber BallsTime (Min)
1A401052000.370.56None10045
1Bc31881500.370.56None01020
2A491201500.150.23None50045
3A71160500.150.23None100045
4A71160500.150.230.015100045
5A491201500.150.230.02750045
Test conditionsa

aRefer to Section 9 for objectives for each test method.

bAll Tests includ an atenate use for 2003 AATCC Standard Liquid Detergent.

cTest 1B provides for the use of White Rubber Balls instead of Stainless Steel Balls.

Determination of color fastness to washing(depend on ISO 105 c06)

Purpose

Learn how fabrics fade and stain other washes in the wash.

Preparation

ECE, IEC, WOB (as required by customers), sodium perborate, sodium carbonate 1g/l, monofilament lining, multifiber lining (DW: low temperature lining; TV: high temperature lining), ISO standard gray scale, washing fastness tester.

gray scale
gray scale
washing fastness tester
washing fastness tester

Sampling

4cm×10cm (including all colors, if the colors are scattered, prepare a few more pieces). When sewing, the front side is sewn along the wool fiber direction and the short side. Yarn and loose fibers should be stitched on all four sides.

Operation steps

1. Firstly adjust the humidity of the sample with the standard atmosphere (20±2℃ 65±2%) for 4 hours.

2. Select the temperature, preheat the test solution in the steel cup for 5-10 minutes, and then put the test cloth. (The test method is based on the customer’s requirements, and the corresponding test type is selected.) After the test, wash it twice with 100ml of distilled water at 40°C, each time for 1min. Shake off excess water and dry at a temperature not higher than 60°C.

Test conditions of ISO 105 C06
Test conditions of ISO 105 C06

A, B methods can add steel balls according to customer requirements, and indicate the number of steel balls. And pH needs to be adjusted with 1g/l sodium carbonate

Rating

Lab Air Conditioning Chamber
Lab Air Conditioning Chamber

Rated after 1 hour of humidity conditioning in a temperature chamber and humidity chamber. The sample and the ISO standard gray scale should be placed at 45° to the desktop, and the line of sight and the fabric is 90°, and two people must be rated at the same time, and the average value of the results is 5.0.

The way to improve color fastness to washing

The color fastness to washing of printed and dyed fabrics is related to the chemical structure of the dye, the combination of the dye and the fiber, and the dyeing process. Therefore, the color fastness to washing of textiles can be improved by these methods.

Select the suitable dyes

Generally, dyes with water-soluble groups have poorer soaping fastness than dyes without water-soluble groups, and the more hydrophilic groups in the dye molecule, the lower the color fastness to washing. Such as acid dyes and direct dyes, because they contain more water-soluble groups, their color fastness to soaping is low. The dyes such as vat and sulfur do not contain water-soluble groups, and have high color fastness to washing. Therefore, choosing a suitable dye can improve the color fastness to washing.

Strengthen the binding force of dye and fiber

The stronger the binding force of the dye to the fiber, the higher the color fastness to washing. Such as acid mordant dye, acid mordant dye and direct copper salt dye, due to the intervention of metal ions, the combination between the dye and the fiber is strengthened, and the color fastness to washing is improved. Another example is that reactive dyes are covalently bonded to fibers during color fixation, and the dyes become part of the fibers. Therefore, the color fastness to washing is better.

In addition, the color fastness to washing of the same dye on different fibers is different. For example, the color fastness to washing of disperse dyes on polyester is higher than that on nylon. This is because polyester has strong hydrophobicity and tight structure.

Choose right dyeing process

The color fastness to washing is closely related to the dyeing process. If the dye is poorly dyed and the floating color cannot be removed, the color fastness to washing will decrease.

This Post Has 6 Comments
  1. Your style is very unique compared to other people I have read stuff from. Thanks for posting when you have the opportunity, Guess I’ll just book mark this page.

Leave a Reply

Back To Top